.
Technical Specifications
Benefits and Features
Equipment
360 View
Generator Set Specifications | |
Gas Standby Rating | 2000 ekW @ 0.8pf |
Fuel Type | Natural Gas, Hydrogen Blend (up to 5%) |
Emissions/Fuel Strategy | U.S. EPA Stationary Non-Emergency Certified |
Frequency | 60 Hz |
RPM | 1800 rpm |
Compression Ratio | 11.5 |
Engine Specifications | |
Engine Model | G3520 |
Displacement | 5956 in³ |
Aspiration | TA |
Bore | 6.7 in |
Stroke | 8.5 in |
Generator Set Dimensions | |
Length | 336 in |
Width | 94 in |
Height | 128 in |
Weight | 48500 lb |
Cat G3520 Gas Engine
- Robust high speed block design provides prolonged life and lower owning operationg costs
- Designed for maximum performance on low pressure pipeline natural gas and hydrogen blends
- Simple open chamber combustion system for reliability and fuel flexibility
- Leading edge technology in ignition system and air/fuel ratio control for lower emission and engine efficiency
- One electronic control module handles all engine functions: ignition, governing, air/fuel ratio control and engine protection
SR5 Generator
- Designed to match performance and output characteristics of Caterpillar gas engines
- Industry leading mechanical and electrical design
- High efficiency
Cat ECS 100 Control Panel
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
Cooling System
- Designed to operate in standard ambient temperatures up to 43°C (110°F)
- Contact your Cat Dealer for specific ambient and altitude capabilities
Emissions
- EPA Certified for use in Emergency and Non-Emergency applications
- Additional a NOx selectable genset is available to meets most worldwide emissions requirements down to 0.5 g/bhp-hr NOx level without aftertreatment
Proven System
- Field proven in a wide range of applications worldwide
- Fully prototype tested
- Certified torsional vibration analysis available
Full Range of Attachments
- Wide range of bolt-on system expansion attachments
- Factory designed and tested
- Flexible packaging options for easy and cost effective installation
Worldwide Product Support
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
- Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
Standard Equipment:
-
- Air Inlet
-
- Two-element single-stage air cleaner with enclosure and service indicator
-
- Control Panel
-
- Cat ECS 100
-
- Cooling
-
- Jacket water and SCAC engine-driven pumps
- Jacket water and SCAC thermostats
-
- Exhaust
-
- Dry exhaust manifolds, insulated and shielded
- Cat-flanged face outlet on turbocharger
- Individual exhaust port and turbocharger outlet wired to integrated temperature sensing module (ITSM) with GCEM providing alarms and shutdowns
-
- Fuel System
-
- Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve
- Engine-installed electronic control valve
- Gas pressure regulator
- Throttle plate, 24V DC actuator, controlled by GECM
- 24V DC energized-to-run (ETR) gas shutoff valve
-
- General
-
- Parts book
- Paint- Caterpillar Yellow with high gloss black rails and radiator
- Operation and maintenance manuals
- Crankshaft vibration damper and guard
- RH Service
-
- Generator
-
- Permanent Magnet Excitiation
- Integrated voltage regulator (IVR)
- SR5
- Winding temperature detectors
- Anti-condensation space heater
- NEMA Class H insulation
-
- Starting/charging
-
- 24V starting motors
- Battery with cables and rack (shipped loose)
- Jacket water heater
- Electric Starter
-
- Governing System
-
- ADEM A4
-
- Ignition System
-
- Electronic Ignition System (controlled by ADEM A4)
- Individual Cylinder Detonation Sensitive Timing (DST)
Optional Equipment:
-
- Air Inlet
-
- Air cleaner with precleaner
-
- Control Panel
-
- EMCP 4.4
- Local alarm module
- Engine failure relay
- Remote annunciator
- Remote PC monitoring
- Local PC monitoring
-
- Circuit Breakers
-
- 1600A, 2000A 3 Pole, UL-100% Rated R-Frame Circuit Breakers
- 100% rated, 3-pole (UL/CSA/IEC) 5th Digit Rating
- S LSI, G LSIG, P LSIG-P, 4th Digit Type
- Frame mounting
- 3-pole (IEC 947-2 rated)
- 2000A, 2500A, 3000A 3 Pole, UL-100% Rated Masterpact Circuit Breakers
-
- Cooling
-
- Package mounted radiator
- Coolant level drain line with valves, fan with guard
-
- Exhaust
-
- 18, 25 dBA Attenuation
- 305mm (12 in) spark arresting muffler
- 305 mm (12in.) elbow
- 305 mm (12 in.) flange
- 305 mm (12 in.) muffler
-
- Fuel System
-
- 3, 0-100 kPag, 4-20mA gas train pressure sensors
-
- General
-
- Digital diagnostic tool
-
- Generator
-
- Bearing temperature detectors
- Generator air filter
- Cable access box
- European bus bars
- Low voltage extension box
-
- Starting/charging
-
- 20A, 24VDC battery charger
- 45A, 24V charging alternator (requires engine driven pumps)
-
- Grid Code Compliance
-
- 60 Hz: USA