Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
Generator Set Specifications | |
Maximum Rating | 800 ekW |
Minimum Rating | 635 ekW |
Emissions/Fuel Strategy | Low Fuel Consumption |
Voltage | 220 to 480 Volts |
Frequency | 60 Hz |
Speed | 1800 rpm |
Duty Cycle | Standby, Prime |
Engine Specifications | |
Engine Model | 3412C TA, V-12, 4-Stroke Water-Cooled Diesel |
Bore | 5.4 in |
Stroke | 6 in |
Displacement | 1648.86 in³ |
Compression Ratio | 13:00:01 |
Aspiration | TA |
Fuel System | Pump and Lines |
Governor Type | ADEM™ A5 |
Generator Set Dimensions | |
Length - Maximum | 162.4 in |
Width - Maximum | 78.3 in |
Height - Maximum | 75 in |
Dry Weight - Genset (minimum) | 5761 lb |
Dry Weight - Genset (maximum) | 13275 lb |
Cat Generator Set Package
- Cat generator set packages have been fully prototype tested
- Accepts 100% block load in one step and meets NFPA 110 loading requirements
- Conform to ISO 8528-5 steady state and transient response requirements
Cat Diesel Engine
- Reliable, rugged, durable design
- Field-proven in thousands of applications worldwide
- Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
SR500 Alternator
- Superior motor starting capability minimizes need for oversizing alternator
- Designed to match performance and output characteristics of Cat diesel engines
- Robust Class H insulation
EMCP 4 Control Panel
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
Cooling System
- Designed to operate in standard ambient temperatures up to 50°C (122°F)
- Contact your Cat Dealer for specific ambient and altitude capabilities
Certifications
One Safe Source
- Components used in the generator set are selected at the design stage to provide optimum package performance
- The generator set is fully assembled at a Caterpillar facility following our quality guidelines
- Each generator set package is tested before leaving the Caterpillar facility
- Cat product support, including dealer service, parts and warranty covers the entire Cat power system
World Wide Product Support
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
- Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
Standard Equipment:
-
- Air Inlet System
-
- Air cleaner, single element canister type
- Single element canister type
-
- Control Panel
-
- Failure to start (overcrank)
- Emergency stop
- EMCP 4.2B
- Speed adjust
- Remote Serial annunciator
- Communications:
- Controls:
- Digital Indicator for:
- Engine cycle crank
- Voltage adjust
- Compatible with the following optional modules:
- Digital I/O module
- Overspeed
- Low coolant level
- Serial annunciator module data link
- Volts (L-L & L-N)
- Emergency stop pushbutton
- Generator temperature monitoring module
- Frequency (Hz)
- Run/auto/ stop/control
- DC volts
- High coolant temperature
- Oil pressure (psi, kPa or bar)
- Customer data link (Modbus RTU)
- RPM
- coolant temperature
- Amps (per phase & average)
- Operating hours.
- Local annunciator
- Low oil pressure
- Power factor (per phase & average)
- Remote CAN annunciator
- Low coolant temperature
- Accessory module data link
- Warning shutdowns:
-
- Cooling System
-
- Coolant drain line with valve
- Caterpillar extended life coolant
- Fan and belt guards
- Radiator with guard (sized for 50 degrees C)
-
- Exhaust System
-
- Stainless steel exhaust flex with ANSI style outlet flange
-
- Fuel System
-
- Primary and Secondary fuel filters
- Water separator
- Fuel priming pump
-
- Generator And Attachments
-
- 3 Phase sensing
- Class H insulation
- Busbar termination
- 12 Leads
- SR4B self excited
- Reactive droop
- Class F temperature rise
- VR6B voltage regulator
- 2:1 Volts/Hz
-
- Governing System
-
- Cat electronic governor
-
- Lube System
-
- Oil drain line with valve
- Oil filter
- Lubricating oil
-
- Mounting System
-
- Base, formed steel with linear vibration isolators between base and engine-generator
-
- Starting / Charging System
-
- 45 Amp Charging alternator
- Fuel shutoff solenoid
- 24 Volt starting motor
- Battery with rack, cables
-
- General
-
- Paint - Caterpillar yellow except rails and radiators gloss black
Optional Equipment:
-
- Air Inlet System
-
- Air cleaner - single element
- Air cleaner - Dual element
- Air cleaner - Heavy element
-
- Certificates
-
- EU Certification
-
- Circuit Breakers
-
- 3 Pole Circuit breakers with shunt trip
- Power terminal strip
- 4 Pole Circuit breakerswith shunt trip
-
- Control Panel
-
- Temperature monitoring package
- EMCP 4.3, EMCP 4.4
- Vandal proof panel door
- Common alarm/shutdown relay
- Generator running VFC
- Earth leakage Ground fault relay
-
- Cooling System
-
- Radiator removal
- Jacket water heater
- Radiator duct flange
-
- Exhaust System
-
- Through wall installation kit
- Manifold and turbocharger guards
- Muffler 35 dBA attenuation
- Muffler 10 dBA attenuation
- Elbow mounting kit
-
- Fuel System
-
- Automatic fuel transfer system
- Manual fuel transfer pump
-
- Generator And Attachments
-
- Oversize and premium generators
- Permanent magnet excitation (PMG)
- Anti-condensation heater
- Internal excitation (IE)
-
- Governing System
-
- Electronic load share
-
- Lube System
-
- Manual sump pump
-
- Mounting System
-
- Fuel tank base (1200 Ltr)
-
- Special Tests / Reports
-
- PGS Test report @ 1.0 power factor
- Factory witness test
- PGS Test report @ 0.8 power factor
-
- Starting / Charging System
-
- Battery chargers
- Oversize battery set
- Heavy duty starting system
- Battery disconnect switch
- Battery removal
-
- Enclosures
-
- DC lighting package
- Weather protective enclosure (WP)
- Sound attenuated enclosure (SA)