Cat 907 Compact Wheel Loader

🔍

Description

Technical Specifications

Benefits and Features

Equipment

360 View

Cat® wheel loaders set the standard for productivity, fuel efficiency and operator comfort. The Cat 907 Compact Wheel Loader has a high torque C2.8 engine that works in conjunction with an intelligent hystat power train to deliver exceptional fuel efficiency. “Shift on the go” locking differentials and hydrostatic transmission provide smooth and powerful operation while increasing the efficiency of machine cycles.

Engine
Maximum Gross Power	74.7 hp
Engine Model	Cat C2.8*
Maximum Engine Speed	2550 rpm
Maximum Gross Power - Rated Engine Speed	2400 r/min
Maximum Gross Power - SAE J1995	74.7 hp
Maximum Gross Power - ISO 14396	74.3 hp
Maximum Gross Power - ISO 14396 (metric)	75.3 mhp
Rated Net Power - Rated Engine Speed	2400 r/min
Rated Net Power - SAE J1349	72.7 hp
Rated Net Power - ISO 9249	72.1 hp
Rated Net Power - 2,400 rpm - ISO 9249 (metric)	73.1 mhp
Maximum Gross Torque - SAE J1995	222 lb/ft
Maximum Gross Torque - ISO 14396	221 lb/ft
Maximum Net Torque - SAE J1349	218 lb/ft
Maximum Net Torque - ISO 9249	217 lb/ft
Displacement	171 in³
Bore	3.54 in
Stroke	4.33 in
Note	*Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Note (1)	Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2)	Net power advertised is the power available at the flywheel.
Note (3)	#Maximum gross and net torque measured at 1,600 rpm.
Weights
Operating Weight	12765 lb
Buckets
Bucket Capacities	0.75-1.55 m³ (1.0-2.0 yd³)
Bucket Capacities - General Purpose	0.80-1.35 m³ (1.0-1.7 yd³)
Bucket Capacities - Light Material	1.25-1.55 m³ (1.6-2.0 yd³)
Multi-Purpose	0.75-1.1 m³ (1.0-1.4 yd³)
Note	Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration.
Note (1)	Bucket capacities stated include BOCE, in line with ISO 7546.
Sustainability
Recyclability	93%
Service Refill Capacities
Fuel Tank	24 Gal
Cooling System	3.2 Gal
Engine Crankcase	2.3 Gal
Axles - Front Center Differential	2.3 Gal
Axles - Rear Center Differential	2.3 Gal
Hydraulic System - Including Tank	17.8 Gal
Hydraulic Tank	11.8 Gal
Transmission	0.6 Gal
Note	No Diesel Exhaust Fluid (DEF) fluid needed on this size engine.
Axles
Front	Fixed (standard), Locking Differential (optional)
Rear	Fixed (standard), Locking Differential (optional)
Note	Oscillation of ±11 degrees via hitch between front and rear frames.
Steering
Steering Articulation Angle - Each Direction	39 °
Maximum Flow - Steering Pump	12.3 gal/min
Maximum Working Pressure - Steering Pump	3336 psi
Steering Cycle Times – (full left to full right) – at High Idle	2.8 s
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	3.25 turns or 4.00 turns
Transmission
Forward and Reverse - Speed Range Creep#	6 mile/h
Forward and Reverse - Speed Range 1*	6 mile/h
Forward and Reverse - Speed Range 2** - High Speed	10.5 mile/h
Forward and Reverse - Speed Range 2** - Standard	12 mile/h
Forward and Reverse - Speed Range 3***	25 mile/h
Note	#Factory default shown, can be adjusted to any speed up to 19 km/h (12 mph).
Note (1)	*Creep function not available in this gear or above.
Note (2)	**Max speed dependent on model and configuration (standard vs. high speed transmission).
Note (3)	***Reverse is 30 km/h (19 mph).
Tires
Tire Size - Standard	*405/70 R18 SPT9
Tire Size - Optional	405/70 R18 Powerloads
Tire Size - Optional (1)	340/80 R18 XMCL/Bibload
Tire Size - Optional (2)	340/80 R18 TRI 2
Tire Size - Optional (3)	40X14-20 TL, SM/TR
Tire Size - Optional 4	340/80 R18 Duraforce
Note	*This tire has been used for all dimension, stability and performance data.
Note (1)	Other tire choices are available. Contact your Cat dealer for details.
Note (2)	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Cab
ROPS	ISO 3471:2008
FOPS	ISO 3449:2005 Level II
Note (1)	Canopy and cab, Rollover Protective Structures (ROPS) are available worldwide. Canopy not available in EU.
Note (2)	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 71 dB(A).
Note (3)	*Measurements were conducted with the cab doors and windows closed.
Note (4)	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 101 dB(A). 99 dB(A) Low Sound – Option available.
Loader Hydraulic System
Main Relief - 1st Auxiliary (3rd slice)	3408 psi
Main Relief - 1st Auxiliary (3rd slice) - Standard Flow*	21 gal/min
Main Relief - 1st Auxiliary (3rd slice) - High Flow*	32 gal/min
Main Relief - 2nd Auxiliary (4th slice)	3408 psi
Main Relief - 2nd Auxiliary (4th slice) - Flow	12 gal/min
Hydraulic Cycle Time - Rackback	2.2 s
Hydraulic Cycle Time - Lift	5 s
Hydraulic Cycle Time - Dump	1.6 s
Hydraulic Cycle Time - Float Down	2.8 s
Note	* Maximum flow stated, actual flow delta could be 6% from data shown. Also adjustable from 20% to 100% of maximum flow through display.
Dimensions - With HPL-V Coupler - Approximate#
Height: Ground to Cab**	8.5 ft
Height: Ground to Beacon**	9.08 ft
Height: Ground Axle Center**	1.58 ft
Height: Ground Clearance**	1 ft
Length: Overall*	17.58 ft
Length: Rear Axle to Bumper	4.58 ft
Length: Hitch to Front Axle	3.58 ft
Length: Wheel Base	7.08 ft
Length: Front Axle to Front of Coupler	3.5 ft
Clearance: Bucket at 45° *	8.25 ft
Clearance: Load over Height**	9.5 ft
Clearance: Level Bucket**	9.92 ft
Height: Bucket Pin**	10.67 ft
Height: Overall**	13.5 ft
Reach: Bucket at 45° *	2.33 ft
Carry Height: Bucket Pin	1.08 ft
Dig Depth**	0.33 in
Width: Bucket	6.75 ft
Width: Tread Center	4.67 ft
Turning Radius: Over Bucket	14.75 ft
Width: Over Tires	6.07 ft
Turning Radius: Outside of Tires	12.92 ft
Turning Radius: Inside of Tires	6.75 ft
Rack Angle at Full Lift	56°
Dump Angle at Full Lift	45°
Rack Angle at Carry	51°
Departure Angle - Degrees	30°
Articulation Angle - Degrees	39°
Operating Weight: Bucket ^	12689 lb
Tipping Load - Straight - ISO 14397-1 †	9773 lb
Tipping Load - Full Turn - ISO 14397-1 †	8235 lb
Operating Weight: Carriage and Tines ^^	12220 lb
Tipping Load - Straight †	7807 lb
Tipping Load - Full Turn †	6569 lb
80% of Tip: Firm and Level EN474-3 ††	5255 lb
Note (1)	*Vary with bucket
Note (2)	**Vary with tire
Note (3)	^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL),1.05 m3 (1.4 yd3) general purpose bucket.
Note (4)	^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class II carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5)	†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6)	††Full compliance to EN474-3 and SAE J1197.
Note (7)	#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8)	Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R18 tires and 1.05 m3 (1.4 yd3) general purpose bucket with bolt-on cutting edge or a class II
Note (9)	Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9.
Dimensions - With SSL Coupler - Approximate
Height - Ground to Cab	8.5 ft
Height: Ground to Beacon**	9.08 ft
Height: Ground Axle Center**	1.58 ft
Height - Ground Clearance	1 ft
Length - Overall with Bucket	18.17 ft
Length: Rear Axle to Bumper	4.58 ft
Length: Hitch to Front Axle	3.58 ft
Length - Wheel Base	7.08 ft
Length: Front Axle to Front of Coupler	4.33 ft
Clearance - Bucket at 45°	7.83 ft
Clearance: Load over Height**	9.5 ft
Clearance - Level Bucket	9.92 ft
Height - Bucket Pin	10.67 ft
Height: Overall**	13.83 ft
Reach - Bucket at 45°	2.67 ft
Carry Height: Bucket Pin	1.17 ft
Dig Depth	3 in
Width - Bucket	6.75 ft
Width - Tread Center	4.67 ft
Turning Radius - Over Bucket	15 ft
Width - Over Tires	6.08 ft
Turning Radius: Outside of Tires	12.92 ft
Turning Radius - Inside Tire	6.75 ft
Rack Angle at Full Lift	51°
Dump Angle at Full Lift	50°
Rack Angle at Carry	46°
Departure Angle - Degrees	30°
Articulation Angle - Degrees	39°
Operating Weight: Bucket ^	12897 lb
Tipping Load – Straight – ISO 14397-1 †	8653 lb
Tipping Load – Full Turn – ISO 14397-1 †	7257 lb
Operating Weight: Carriage and Tines ^^	12414 lb
Tipping Load - Straight †	7416 lb
Tipping Load - Full Turn †	6266 lb
80% of Tip: Firm and Level EN474-3 ††	5013 lb
Note (1)	*Vary with bucket
Note (2)	**Vary with tire
Note (3)	^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL),1.05 m3 (1.4 yd3) general purpose bucket.
Note (4)	^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class II carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5)	†Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6)	††Full compliance to EN474-3 and SAE J1197.
Note (7)	#HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8)	Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R18 tires and 1.05 m3 (1.4 yd3) general purpose bucket with bolt-on cutting edge or a class II
Note (9)	Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9.

CONFIGURED FOR SUCCESS

Cat® wheel loaders set the standard for productivity, fuel efficiency and operator comfort. The Cat 907 Compact Wheel Loader has a high torque C2.8 engine that works in conjunction with an intelligent hystat power train to deliver exceptional fuel efficiency. This engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards with a clean emission module designed to manage itself so you can concentrate on the task at hand.

ENJOY ALL DAY COMFORT

All new cab is spacious, quiet and comfortable with all around 360° visibility to keep you productive throughout the day. Seat-mounted controls feature a multifunction joystick for lift and tilt functions with an integrated thumb operated speed range, forward/neutral/reverse (FNR) switch, trigger operated differential lock and constant flow. Optional fourth function joystick also available.
Digital display with soft touch buttons for customized settings to easily control linkage and drive train to further enhance operator comfort and safety.

EFFICIENTLY POWERFUL

Cat C2.8 engine provides a cleaner, quieter operation while delivering superior performance and durability through a high torque, low speed design. Caterpillar’s exclusive Intelligent Power Management system monitors operator input and available power to keep the machine working at peak efficiency.
“Shift on the go” locking differentials and hydrostatic transmission provide smooth and powerful operation while increasing the efficiency of machine cycles. New Powertrain (Utility) Mode via the display enables right pedal machine operation giving further improved operator controllability of attachment RPM versus machine ground speed over creep control and inching pedal.

WORK MADE EASY

All-in-one joystick to keep eyes on the work while maximizing operation of hydro-mechanical attachments with a state of the art pressure compensated electro-hydraulic system. Optimized Z-bar linkage for great performance and versatility with buckets that now have the DNA of the larger Cat loaders, such as curved side plates and a flat torque tube for parallel reference to the cutting edge.

CUSTOMIZE YOUR EXPERIENCE

Work as one with your machine by customizing the controls. Operator can adjust machine responsiveness with the push of a button based on the attachment or application. Once customized, settings can be locked with “simplified mode” to ensure the machine is consistent and intuitive for every user.
Machine security is enhanced with a standard keycode or optional Bluetooth® technology.

PURPOSE BUILT SPECIALTY MODELS

Machines can be built to meet industry and application specific needs: Agriculture, General Construction, Industrial and Waste, Landscaping or Snow Removal.
The 907 is availble with the following specific handler arrangements: Ag Handler and Waste Handler

AFTERMARKET AND SERVICES

Range of services and aftermarket retrofits and upgrades available to keep your machine going and configured for your application.
Service and maintenance parts available, including a range of self-service options (SSO) and dealer installed kits.
Integrated Technology available to reduce service costs and maintenance.

SUSTAINABILITY

The Cat® C2.8 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.
Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.
Advanced Electro Hydraulic System provides the optimum balance of power and efficiency while giving you the control you need for your precise jobsite requirements.
Engine Demand Fan is hydraulically driven to provide machine cooling only when needed, improving fuel efficiency and reducing greenhouse gas emissions.
Hydrostatic Transmission is an efficient way to transfer engine power to the wheels at low speeds versus a torque converter.
Efficient HVAC regulates temperature control. No need to leave the machine running to cool the cab.
Shift on the go transmission, means no need to stop so you keep your momentum.

Standard Equipment:

Other
- Fenders, front and rear
- Loader arm safety brace
- Lockable, fuel cap, HVAC filters, nose cone
- Ground level easy access daily service points
- Machine lifting/tie down points
- Scheduled Oil Sampling (S·O·S SM) ports, engine oil and hydraulic oil
- Recovery hitch with pin
- Paint, Electro-Coat primer, gloss topcoat
- Lockable main and side engine enclosures
Hydraulics
- Dead engine lower, lift valve, manual
- Hydraulic pilot shut off switch, in cab
- Hystat displacement pump, infinitely variable
- Motor, single drive with dedicated implement and steering pumps
- Electro-hydraulic, fully proportional controls
- Demand cooling fan, hydraulically driven
- Caterpillar HYDO^™ Advanced 10 hydraulic oil
- Implement valve, pressure compensated
- Joystick, single lever, single auxiliary roller
- Coupler/pin on attachment ready
- Multi-function lift and tilt with loader arm float
Electrical
- Lights, roading, front halogen
- Alternator, 100 amp sealed
- Service (Electronic Technician^™)
- Lights, rear stop and turn, LED
- Battery, heavy duty, 12V, 90Ah and 1,000 CCA
- Product Link^™
- Cab mounted fuse panel
- Battery disconnect switch
Power Train
- Axles, heavy duty, frame mounted with outboard planetary reduction
- Closed circuit breather Coolant, extended life, –36° C (–33° F)
- Fuel pump, priming (manual)/water separator/drain
- Air cleaner, two stage filter, with in cab audio/visual indicator on display
- Cat C2.8 engine
  –Diesel particulate filter (Fit for Life)
  –Fuel, diesel, ultra low or low Sulphur
  –Hydrostatic transmission, two speed, with inching function, “shift on the go”
  –Power train mode, hystat
- U.S. EPA Tier 4 Final and EU Stage V emissions compliant
- Drive shaft, sealed for life, universal joints Engine, auto idle shutdown, hibernation mode
- Engine oil, ECO drain tap and hose
Operator Environment
- Cab
  –Doors (2), fixed glass
  –Wipers, front and rear, full front coverage
  –Windshield, front single piece
  –Window, rear heated
  –Radio ready, speakers and wiring
  –Air vents, (4) screen, (7) directional
  –Heating, mechanical control unit
  –Sun visor, solid, front full width
  –Interior light (incandescent)
- Joystick, seat mounted, standard multifunction
  –FNR, auxiliary roller, speed range select, continuous flow, differential lock, horn
  –Arm rest, padded right, multiple position vertical height
- Seat, manual height adjustment, (cab) fabric with adjustable left arm rest, (canopy) vinyl
- ROPS/FOPS certified canopy/cab
  –12V power outlets, interior/exterior
  –Pedals, raised, foot, brake/inching, accelerator
  –Lever, parking brake
  –Cup holders (2)
  –CB radio clip, phone holder
  –Door release, internal (left and right)
  –Hook, large, coat and hard hat
  –Floormat, heavy duty, easy clean
  –Mirrors, (2) external breakaway, (1) internal
  –Operator station on isolation mounts
  –Steering wheel, spinner knob, horn in center
  –Seat belt, orange, retractable, 51 mm (2 in)
  –Storage, personal (trays [3], seat pocket)
  –Steering column, tilt adjusted
  –Column mounted multi function control: lights, roading, wipers, self canceling turn signals
  –Quick coupler switch, in cab
- Display, analog and digital
  –Gauges (2), hydraulic oil, engine coolant
  –Digital with soft touch buttons – fuel level, speed range, speedometer, service hour meter, service/maintenance information, hydraulic and power train performance and aggressiveness settings, security passcode (multiple languages)