140/140 AWD Motor Grader

🔍

Description

Technical Specifications

Benefits and Features

Equipment

360 View

The Cat® 140 Motor Grader gives you more precise grading in a comfortable cab. Joystick controls provide ergonomic comfort for the operator. With a range of technology options, you can improve grading accuracy and save on materials. With extended maintenance intervals, the 140 Motor Grader sets the pace for low operating costs, while maintaining productivity and efficiency.

Engine
Net Power Range (Tier 4)	179 hp
Engine Model	Cat® C9.3
Bore	4.5 in
Stroke	5.9 in
Speed at Rated Power	2,000 rpm
VHP Plus - Gear - Net Power - Forward 4th	210 hp
VHP Plus - Gear - Net Power - Forward 8th	231 hp
Base Power (1st Gear) - Net - Metric	181 hp
Maximum Torque - VHP Plus	840 lb/ft
VHP Plus Range - Net - Metric	133-172 kW (181-234 hp)
Standard Capability	109 °F
VHP Plus - Gear - Net Power - Forward 2nd	189 hp
VHP Plus - Gear - Net Power - Forward 3rd	200 hp
VHP Plus - Gear - Net Power - Forward 1st	179 hp
Emissions	U.S. EPA Tier 4 Final/EU Stage V
VHP Plus - Gear - Net Power - Reverse 2nd	189 hp
VHP Plus - Gear - Net Power - Forward 5th	215 hp
VHP Plus - Gear - Net Power - Reverse 1st	179 hp
VHP Plus - Gear - Net Power - Forward 7th	225 hp
VHP Plus - Gear - Net Power - Forward 6th	220 hp
VHP Plus - Gear - Net Power - Reverse 3rd-6th	200 hp
High Ambient - Fan Speed - Standard	1,400 rpm
VHP Plus Range - Net	133-172 kW (179-231 hp)
Torque Rise	38%
Displacement	567.5 in³
Number of Cylinders	6
Derating Altitude	10000 ft
High Ambient - Fan Speed - Maximum	1,550 rpm
High Ambient - Fan Speed - Minimum	500 rpm
High - Ambient Capability	122 °F
Weights
Operating Weight - Typically Equipped	42647 lb
Gross Vehicle Weight - Maximum - Front Axle	17075 lb
Gross Vehicle Weight - Maximum - Rear Axle	38069 lb
Operating Weight - Typically Equipped - Front Axle	12055 lb
Operating Weight - Typically Equipped - Rear Axle	30592 lb
Gross Vehicle Weight - Base - Front Axle	9343 lb
Gross Vehicle Weight - Base - Rear Axle	28077 lb
Gross Vehicle Weight - Maximum - Total	55144 lb
Gross Vehicle Weight - Base - Total	37420 lb
Operating Weight - Typically Equipped - Total	42647 lb
Moldboard
Blade Width	12 ft
Moldboard - Height	24 in
Moldboard - Thickness	0.87 in
Arc Radius	16.3 in
Throat Clearance	6.5 in
Cutting Edge Width	6 in
Cutting Edge Thickness	0.6 in
End Bit - Width	6 in
End Bit - Thickness	0.6 in
Blade Pull - Base GVW	25269 lb
Blade Pull - Maximum GVW	34262 lb
Blade Down Pressure - Base GVW	16038 lb
Blade Down Pressure - Maximum GVW	29309 lb
Moldboard - Blade Width	12 ft
Operating Specifications
Top Speed - Forward	29 mile/h
Top Speed - Reverse	23 mile/h
Turning Radius - Outside Front Tires	25.59 ft
Steering Range - Left/Right	50°
Articulation Angle - Left/Right	20°
Forward - 1st	2.5 mile/h
Forward - 2nd	3.4 mile/h
Forward - 3rd	5 mile/h
Forward - 4th	6.9 mile/h
Forward - 5th	10.6 mile/h
Forward - 6th	14.5 mile/h
Forward - 7th	19.9 mile/h
Forward - 8th	29 mile/h
Reverse - 1st	2 mile/h
Reverse - 2nd	3.7 mile/h
Reverse - 3rd	5.4 mile/h
Reverse - 4th	8.4 mile/h
Reverse - 5th	15.7 mile/h
Reverse - 6th	23 mile/h
Service Refill
Fuel Capacity	104 gal (US)
Cooling System	15 gal (US)
Hydraulic System - Total	26.4 gal (US)
Hydraulic System - Tank	16.9 gal (US)
Diesel Exhaust Fluid	5.8 gal (US)
Transmission - Differential - Final Drives	18.5 gal (US)
Engine Oil	7.9 gal (US)
Tandem Housing - Each	20 gal (US)
Front Wheel Spindle Bearing Housing	0.13 gal (US)
Circle Drive Housing	1.8 gal (US)
Power Train
Forward/Reverse Gears	8 Forward/6 Reverse
Transmission	APECS, Direct Drive, Powershift
Brakes - Service	Multiple Oil Disc
Brakes - Service - Surface Area	3565 in²
Brakes - Parking	Multiple Oil Disc
Brakes - Secondary	Dual Circuit
Hydraulic System
Circuit Type	Parallel
Pump Type	Variable Piston
Pump Output	55.7 gal/min
Maximum System Pressure	3500 psi
Reservoir Tank Capacity	16.9 gal (US)
Standby Pressure	885 psi
Frame
Drawbar - Width	3 in
Circle - Diameter	60.2 in
Circle - Blade Beam Thickness	1.6 in
Drawbar - Height	6 in
Front Frame Structure - Width	12 in
Circle - Height	5.4 in
Front Frame Structure - Height	12.6 in
Drawbar - Thickness	0.5 in
Front-Top/Bottom Plate - Width	12 in
Front-Top/Bottom Plate - Thickness	0.87 in
Front Axle - Height to Center	23.5 in
Front Axle - Wheel Lean - Left/Right	18°
Front Axle - Total Oscillation per Side	32Â°
Blade Range
Circle Centershift - Right	28.7 in
Circle Centershift - Left	27.4 in
Moldboard Sideshift - Right	26 in
Moldboard Sideshift - Left	20.1 in
Maximum Blade Position Angle	90°
Blade Tip Range - Forward	40°
Blade Tip Range - Backward	5°
Maximum Shoulder Reach Outside of Tires - Right	77.9 in
Maximum Shoulder Reach Outside of Tires - Left	70.5 in
Maximum Lift Above Ground	18.9 in
Maximum Depth of Cut	28.1 in
Ripper
Ripping Depth - Maximum	16.8 in
Ripper Shank Holder Spacing	21 in
Ripper Shank Holders	5
Penetration Force	20812 lb
Pry-Out Force	27794 lb
Machine Length Increase, Beam Raised	40.6 in
Scarifier
Mid, V-Type - Working Width	46.6 in
Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum	18.4 in
Mid, V-Type - Scarifying Depth, Maximum	11.5 in
Rear - Scarifying Depth, Maximum	16.8 in
Front, V-Type - Working Width	47.4 in
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing	4.6 in
Front, V-Type, 5 or 11 Tooth - Working Width	40.6 in
Mid, V-Type - Scarifier Shank Holders	11
Mid, V-Type - Scarifier Shank Holder Spacing	4.6 in
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders	11-May
Rear - Working Width	84 in
Rear - Scarifier Shank Holders	9
Rear - Scarifier Shank Holder Spacing	10.5 in
Standards
Brakes	ISO 3450
Steering	ISO 5010
Sound	ISO 6394; ISO 6395
ROPS/FOPS	ISO 3471/ISO 3449
Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas.
Tandems
Height	19.9 in
Width	7.9 in
Sidewall Thickness - Inner	0.63 in
Sidewall Thickness - Outer	0.71 in
Drive Chain Pitch	2 in
Wheel Axle Spacing	60 in
Tandem Oscillation - Front Up	15°
Tandem Oscillation - Front Down	25°
Dimensions
Height - Top of Cab	130 in
Length - Counterweight to Ripper	399 in
Width - Outside Front Tires	98.9 in
Length - Front Axle to Mid Tandem	241 in
Length - Front Tire to Rear of Machine	351 in
Length - Front Axle to Moldboard	100 in
Length - Between Tandem Axles	60 in
Width - Outside Rear Tires	98.9 in
Width - Tire Center Lines	84.3 in
Height - Front Axle Center	23.5 in
Height - Exhaust Stack	128 in
Height - Top of Cylinders	120 in
Ground Clearance - Rear Axle	13.3 in

Latest Features

Cab Modernization

Continuously improved user interface allows for intuitive navigation, minimizing performance interruption with the easy-to-use 10-inch touchscreen menu.

Integrated high definition (HD) rear vision camera.

Display-initiated Remote Flash.

Operator may choose to have rear vision camera on all the time or have it show in display automatically when machine is put in reverse gears.

Larger cross slope screen.

Planned Maintenance (PM) alert sync in display.

Identify apps quickly with a grid list view, abbreviated app names, and categorized menu options.

A new notification center keeps important information visible to the operator and displays messages without shrinking the camera view.

Color coded notifications set critical messages apart from the rest.

Technology Options

Cat Grade 3D Ready
Cat Grade with 3D for motor graders is a machine integrated grade control system that helps you get to grade faster with more accuracy, efficiency and productivity. Automatic blade control reduces operator inputs and the number of passes to get the job done to save you time and money.

Cross Slope Assist
Cross Slope Assist now includes Position Sensing Shift Cylinder (PSC), E-fence Blade Avoidance, and two IMU sensors to simplify mastless upgrades. It allows the operator to manuall control one end of the moldboard while the system controls the other.

Attachment Ready Option
Attachment Ready Option (ARO) provides sensor-ready swivel mountings for faster aftermarket work tool installation.

New High Performance Circle
The optional High Performance Circle (HPC) improves machine performance, efficiency, and uptime through increased service intervals and longer life. Meeting grade elevation tolerance in road design efficiently is important to reduce rework on the job. With the HPC, you have greater confidence in meeting grade elevation tolerance design due to reduced wear between circle and drawbar.

Not all features are available in all regions. Please check with your local Cat dealer for specific offering availability in your area. Build Number 15B.

Better Comfort and Control

Good visibility is key to safety and efficiency. Angled cab doors, tapered engine enclosure and a sloped rear window make it easy to see the moldboard and tires, as well as behind the machine. The standard rear vision camera further enhances lines of sight all around the machine.

Experience the most spacious, comfortable cab in the industry.

Easy-to-learn joystick controls replace levers, so hand and arm movement is reduced, helping reduce operator fatigue for better productivity.

Industry-exclusive three axis joysticks
Left joystick controls have transmission, gear shifting up and down, and transmission directional control.
Right joystick controls drawbar, circle and moldboard functions as well as electronic throttle control and manual differential lock/unlock.

Joystick follow steer - lean angle mirrors the steer tires' turning angle.

Friction pack, a brake tensioning system, holds the joystick in position until the operator moves it.

Cat joystick Motor Graders have industry-exclusive follow steer, which allows the front wheels to follow the joystick input.

Infinitely variable roller switches control the rear ripper and/or front lift group (when equipped).

Control switches are in easy reach.

Updated seat offers softer cushions, three-position tilt and optional heated and heated/cooled cushions.

Control pods are electronically positioned allowing each operator to set the ideal operating position.

Multiple isolation mounts reduce sound and vibration for a more relaxed work environment.

High capacity Heating, Ventilation and Air Conditioning system dehumidifies and pressurizes the cab, circulates fresh air, seals out dust and keeps windows clear.

Option of choosing AM/FM/Weatherband/Bluetooth® technology or AM/FM/Weatherband/Bluetooth plus Sirius XM radio.

Electronic Throttle Control helps improve productivity by providing the best match of horsepower and torque for the demands of the application.

Articulation Return-to-Center automatically returns the machine to a straight frame position from any angle with the touch of a button.

Select Fine, Normal or Coarse blade lift modulation to best fit application or operator preference.

Performance and Productivity

Cat C9.3 engine delivers the performance needed to maintain consistent grading speeds for maximum productivity.

Latest engine technology optimize productivity, fuel efficiency, reliability, life and minimize emissions.

Hydraulic demand fan automatically adjusts speed according to engine cooling requirements. When cooling demand is reduced, you benefit from more power to the ground and improved fuel efficiency.

Optional reversing fan clears debris on-the-go.

Engine Idle Shutdown Timer is software-enabled by your Cat dealer to shut down the engine after a set period of time to save you fuel and help reduce emissions.

Motor Graders give you efficiency and longevity in your most demanding applications.

Standard Automatic Differential Lock/Unlock unlocks the differential during a turn and re-locks when straight for easier operation and to help protect the power train.

Full Electronic Clutch Pressure Control system optimizes inching modulation for smooth shifts and directional changes, reducing stress on gears.

Programmable AutoShift option simplifies operation by allowing the operator to program the transmission to shift at optimal points to match your application.

Eco mode can be engaged for up to 10% fuel savings depending upon application.

Power Shift Countershaft Transmission is matched to the Cat engine to maximize power to the ground.

Wide operating gear range for maximum productivity.

Engine Over-Speed Protection prevents downshifting until an acceptable safe travel speed has been established.

Sealed spindle on tandem drive machines keeps front axle bearings lubricated and protected from contaminants. The Cat “Live Spindle” design places the larger tapered roller bearing on the outside, where the load is greater, extending bearing life.

Bolt-on modular rear axle improves serviceability and contamination control with easy access to differential components.

Oil-bath, multi-disc service brakes are hydraulically actuated for smooth, predictable braking and lower operating costs. Brakes are located at each tandem wheel and have a large total brake surface area to give you dependable stopping power and longer life.

Emissions technology is transparent with no action required from the operator or need to stop. Regeneration runs automatically at cold start-up and, if needed, in the background while you work.

Reaching Tier 4 Final standards only required one additional system to the proven Cat emission strategy - Selective Catalytic Reduction (SCR).

SCR utilizes Diesel Exhaust Fluid (DEF), conveniently filled from ground level when re-fueling.

A gauge on the dash shows your fluid level.

At shutdown, a pump automatically purges the DEF lines.

If the engine/aftertreatment temperatures are high, a Delayed Engine Shutdown will activate automatically to cool the machine and then purge the lines.

Heavy Duty Construction

One-piece forged steel circle stands up to high stress loads, and a sacrificial wear system helps keep your service time and costs down.

Articulation hitch features a large tapered roller bearing to carry loads evenly. The bearing is sealed preventing contamination and a locking pin prevents articulation during service or transport.

Drawbar, circle and moldboard are designed to make it easy for you to keep the components tight.

Shims and patented top-adjust wear strips are easy to add or replace, dramatically reducing downtime.

Nylon composite wear inserts maximize circle torque and component life.

Sacrificial brass wear strips between the blade mounting group and moldboard can be easily adjusted and replaced.

Shimless Moldboard Retention System uses vertical and horizontal adjusting screws to keep moldboard wear strips aligned for reduced blade chatter and precise control.

With an aggressive blade angle, optimized moldboard curvature and large throat clearance, you work more efficiently by allowing material to roll more freely along the blade.

Heat-treated rails, hardened cutting edges and end bits, and heavy duty bolts provide greater moldboard reliability and long service life.

Link bar allows extreme moldboard positioning for easier bank sloping and ditch cutting/cleaning.

Technology that Gets Work Done

Cat technologies offer key improvements in equipment management, productivity, and safety.

Equipment Management
Increase uptime and reduce operating costs.

Productivity
Monitor production and manage job site efficiency.

Safety
Enhance job site awareness to keep your people and equipment safe.

Featured Cat Technologies
Cat Grade 3D Ready
Cat Grade with 3D for motor graders is a machine integrated grade control system that helps you get to grade faster with more accuracy, efficiency and productivity. Automatic blade control reduces operator inputs and the number of passes to get the job done to save you time and money. E-fence is fully calibrated from the factory.

Cross Slope Assist
Cross Slope Assist now includes Position Sensing Shift Cylinder (PSC), E-fence Blade Avoidance, and two IMU sensors to simplify mastless upgrades. It allows the operator to manual control one end of the moldboard while the system controls the other.

Attachment Ready Option
Attachment Ready Option (ARO) provides sensor-ready swivel mountings for faster aftermarket work tool installation.

Using the data from technology equipped machines, get more information and insight into equipment and operations.

Electronic Technician (Cat ET)
Allows service technicians access to stored diagnostic data and configure machine parameters through the Cat Data Link.

Low Battery Elevated Idle
Raises idle speed when low system voltage is detected, ensuring adequate system voltage and improving battery reliability.

Automatic Engine Deration
Gain protection for the engine by automatically lowering engine torque output and alerting the operator if critical conditions are detected.

Production Measurement System
Manage your fleet of machines while reducing fuel burn with Cat Production Measurement System option. The Efficiency Coach and Application Segmentation work together to monitor operators and machines simultaneously. Measure your jobsite’s efficiency and productivity from anywhere on the website.

Product Link and VisionLinkTM
Link technologies that provide wireless capability to machines enabling two-way transfer of information collected by on-board sensors, control modules, and other Cat technologies using off-board apps, such as Cat VisionLink® software.
Cat Product Link/VisionLink is deeply integrated, helping take guesswork out of equipment management. Easy access to timely information like machine location, hours, fuel usage, idle time and event codes via the online VisionLink user interface helps effectively manage fleet and lower operating costs.
Grade technologies combine digital design data, in-cab guidance, and automatic blade controls to enhance grading accuracy, reduce rework, and lower costs related to production earthmoving and rough, fine and finish grade applications.

Built-In Safety Features

Operator Presence Monitor keeps the parking brake engaged and hydraulic implements disabled until the operator is seated and the machine is ready for operation.

Speed Sensitive Steering lessens steering sensitivity as ground speed increases for greater operator confidence and control.

The standard Secondary Steering System's electric hydraulic pump automatically engages in case of a drop in steering pressure to ensure operator can steer the machine to a stop.

Hydraulic lockout disables all implement functions while still providing machine steering control. Especially useful while roading.

Brakes are located at each tandem wheel to eliminate braking loads on the power train. Redundant brake systems utilize accumulators to enable stopping in case of machine failure.

Perforated steel tandem walkways and convenient grab rails provide a sturdy platform when moving on, off and around the machine.

Circle Drive Slip Clutch protects the drawbar, circle and moldboard from shock loads if the blade encounters an immovable object and also reduces the possibility of abrupt directional changes in poor traction conditions.

Blade Lift Accumulators help absorb impact loads by allowing vertical blade travel. This optional feature reduces wear and impact loading for enhanced operator safety.

Safety Features -

Optional rearview camera with in-cab monitor

New, optional seat belt indicator light reminds operator to fasten safety belt

Grouped, ground level service points

Laminated front window glass

Optional LED Lighting

Ground-level electrical disconnect switch

Ground-level engine shutoff switch

Anti-glare paint eases night operation

Optional front and rear fenders

Top-Tier Service and Support

Cat motor graders are designed to help you increase uptime and reduce costs:

Grouped service points and extended service intervals save maintenance time.

New optional LED lights in the left hand compartment facilitates machine servicing in low light.

Your Cat dealer provides support that is second to none. From machine selection and purchase to training, maintenance support and rebuilds, Cat dealers have the experience and capabilities to help keep you up and running.

Sustainability

The Cat® C9.3 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.

Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.

Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.

Cat® Grade helps reduce fuel burn and greenhouse gas emissions by enabling you to achieve grade faster and more accurately by automating blade actions.

Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.

VisionLink® displays the CO2 emissions for monitored assets, calculated by fuel type for the Runtime Fuel Burned each day in a selected date range.

Don't waste fuel idling. Cat VisionLink® online fleet monitoring helps you manage idle time and reduce fuel burn and greenhouse gas emissions.

Cat® Reman parts are a sustainable choice. New Cat parts are designed with the potential to have more than one life, so Cat Reman parts are truly remanufactured — not just repaired, rebuilt or reconditioned. Because the process ensures the latest design changes are incorporated into Cat Reman parts, you get like new quality and outstanding performance at lower cost.

*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).

Standard Equipment:

Note
- Standard and optional equipment may vary. Consult your Cat dealer for details.
Powertrain
- Air cleaner, dual stage, dry type, diesel, with automatic engine derate and automatic dust ejector, service indicator through Cat Messenger
- Air-to-air after cooler (ATAAC)
- Belt, serpentine, automatic tensioner
- Brakes, oil disc, four-wheel, hydraulic
- Demand fan, hydraulic, swing-out
- Diesel exhaust fluid tank, 22.0 L (5.8 gal) ground level access, and sediment drain
- Differential Lock/Unlock, Automatic
- Drain, engine oil, ecology
- Eco mode
- Electronic over speed protection
- Engine C9.3 U.S. EPA Tier 4 Final/EU Stage V emission standards
- Fuel tank, 394 L (104 gal), ground level access and sediment drain
- Parking brake - multi-disc, sealed, oil-cooled
- Priming pump, fuel
- Rear axle, modular
- Sediment drain, fuel tank
- Tandem drive
- Transmission, 8F/6R, powershift, direct drive, Advanced Productivity Electronic Control Strategy (APECS)
Electrical
- Alarm, back up
- Alternator, 150 ampere, sealed
- Batteries, maintenance free, heavy duty, 1125 CCA
- Breaker panel, ground accessible
- Cab harness and electrical hydraulic valves
- Electrical system, 24V
- Grade Control Ready - Cab harness, software, electrical hydraulic valves, bosses and brackets
- Lights, roof-mounted roading, reversing, LED stop and tail
- Product Link
- Starter, electric
Operator Environment
- Accelerator
- Air conditioning with heater
- Arm and wrist rest, electronically adjustable
- Articulation, automatic Return-to-Center
- Cat Messenger operator information system
- Centershift pin indicator
- Coat hook
- Cup holder
- Display, digital speed and gear
- Doors, left and right side with wiper
- Gauge, machine level
- Gauge cluster (analog) - fuel, articulation, engine coolant temp, engine RPM, hydraulic oil temp, regen, DEF
- Hour meter, digital
- Joystick hydraulic controls right/left blade lift with float position, circle drive, blade sideshift and tip, centershift, front wheel lean, articulation and power steering
- Joystick, adjustable armrests
- Joystick gear selection
- Joystick hydraulic power steering
- Ladders, cab, left and right side
- Lights, night time cab
- Mirror, inside rearview, wide angle
- Power port, 12V
- Radio Ready, Entertainment
- ROPS cab, sound suppressed 70 dB(A)
- Seat, cloth-covered, comfort suspension
- Seat belt, retractable 76 mm (3 in)
- Storage area for cooler/lunchbox
- Throttle control, electronic
- Windows, laminated glass: - fixed front with intermittent wiper - door with intermittent wipers (3)
- Windows: tempered: - left and right side wipers - rear and intermittent wiper
Fluids
- Antifreeze
- Extended Life Coolant to -35° C (-30° F)
Tires, Rims And Wheels
- Partial allowance for tires on 254 — 607 mm (10 — 24 in) multi-piece rims is included in the base machine price and weight
Other Standard Equipment
- Accumulators, brake, dual certified
- Anti-glare paint
- Bumper, rear, integrated with hitch
- CD ROM Parts Book
- Clutch, circle drive slip
- Cutting edges: - 152 — 16 mm (6 — 5/8 in) - curved DH-2 steel - 19 mm (3/4 in) mounting bolts
- Doors (3), engine compartment, locking
- Drawbar - 6 shoes, replaceable wear strips
- Electrical hydraulic valves, hydraulic lines for base 8 functions
- Endbits: - 16 mm (5/8 in) DH-2 steel - 19 mm (3/4 in) mounting bolts
- Fluid check, ground level
- Frame, articulated, with safety lock
- Ground level engine shutdown
- Hammer (emergency exit)
- Horn, electric
- Hydraulic lines for base functions
- Lockout, hydraulic implement (for roading and servicing)
- Moldboard
- Mounting, cab roof accessories
- Pump, hydraulic, high capacity, 98 cm³ (6 in³)
- Radiator, cleanout access (both sides with swing doors)
- Secondary steering
- Serviceability, LH side
- S·O·S ports: engine, hydraulic, transmission, coolant, fuel
- Tandem walkway/guards
- Tool box