.
Description
Technical Specifications
Benefits and Features
Equipment
360 View
The Cat® 310 Mini Excavator delivers maximum power and performance in a mini size to help you work in a wide range of applications.
Engine | |
Net Power | 69.5 hp |
Bore | 3.7 in |
Displacement | 203 in³ |
Stroke | 4.7 in |
Note 1 | Advertised power is tested per the specified standard in effect at the time of manufacture. |
Note | Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, exhaust system and fan. |
Gross Power - SAE J1995:2014 | 74.3 hp |
Engine Model - U.S. EPA Tier 4 Final/EU Stage V | Cat® C3.3B |
Net Power - 2,200 rpm - ISO 9249:2007, 80/1269/EEC | 69.5 hp |
Weights | |
Operating Weight | 23002 lb |
Maximum Operating Weight with Cab** | 23002 lb |
Minimum Operating Weight with Cab* | 21170 lb |
Note (1) | *Minimum Weight is based on steel tracks, no counterweight, operator, full fuel tank, long stick, blade and no bucket. |
Note (2) | **Maximum Weight is based on steel tracks with rubber pads, counterweight, operator, full fuel tank, long stick, blade and no bucket. |
Dimensions | |
Dig Depth | 205.2 in |
Blade | |
Height | 17 in |
Width - Standard | 97.2 in |
Width - Wide | 103.9 in |
Hydraulic System | |
Maximum Auxiliary Circuit - Primary - Pressure at Pump | 4134 psi |
Maximum Auxiliary Circuit - Secondary - Pressure at Pump | 4134 psi |
Maximum Auxiliary Circuit - Primary - Flow at Pump | 35 gal/min |
Digging Force - Bucket | 17459 lb |
Digging Force - Stick | 11060 lb |
Operating Pressure - Equipment | 4134 psi |
Operating Pressure - Swing | 3336 psi |
Operating Pressure - Travel | 4134 psi |
Pump Flow at 2,400 rpm | 62 gal/min |
Type | Load Sensing Hydraulics with Variable Displacement Piston Pump |
Note | Flow and pressure are not combinable. Under load, as flow rises pressure goes down. |
Maximum Auxiliary Circuit - Secondary - Flow at Pump | 9 gal/min |
Dimensions - Standard Stick | |
Tail Swing without Counterweight | 70.9 in |
Stick Length | 98.4 in |
Boom In Reach | 83.3 in |
Maximum Reach | 303 in |
Dig Depth | 205.2 in |
Ground Clearance - Frame | 14 in |
O/A Track Width | 97.2 in |
Cab Height | 100 in |
Track Belt/Shoe Width | 17.7 in |
Maximum Blade Depth | 18.8 in |
Maximum Dump Clearance | 229.5 in |
Maximum Dig Height | 313.8 in |
Maximum Blade Height | 16.6 in |
Tail Swing - Standard Counterweight | 76.1 in |
O/A Undercarriage Length | 126 in |
Vertical Wall | 172.6 in |
Swing Bearing - Height | 28.9 in |
Maximum Reach - Ground Level | 298 in |
Overall Shipping Length - with Counterweight | 274.9 in |
Note (2) | **Boom Height when stick is pinned in working position with attachments. |
Note (1) | *Boom Height when stick is pinned in transport position (if available) with no attachments. |
Overall Shipping Length - without Counterweight | 269.7 in |
Height - Boom Transport - No Tools* | 100.4 in |
Height - Boom Working - With Tools** | 106.3 in |
Sound | |
Average Exterior Sound Pressure (ISO 6395:2008) | 99 dB(A) |
Operator Sound Pressure (ISO 6396:2008) | 72 dB(A) |
Note | European Union Directive "2000/14/EC" |
Sustainability | |
Recyclability | 96% |
Air Conditioning System | |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. |
Certification - Cab | |
Roll Over Protective Structure (ROPS) | ISO 12117-2:2008 |
Top Guard | ISO 10262:1998 (Level I) |
Weight Increase from Minimum Configuration | |
Extra Counterweight | 1103 lb |
Counterweight | 551 lb |
Steel Tracks with Pads | 728 lb |
Service Refill Capacities | |
Cooling System | 2.6 gal (US) |
Engine Oil | 3 gal (US) |
Fuel Tank | 38 gal (US) |
Hydraulic System | 37 gal (US) |
Hydraulic Tank | 14 gal (US) |
Swing System | |
Machine Swing Speed | 10.6 r/min |
Travel System | |
Gradeability - Maximum | 30 degrees |
Ground Pressure - Maximum Weight | 5.9 psi |
Ground Pressure - Minimum Weight | 5.4 psi |
Maximum Traction Force - High Speed | 6497 lb |
Maximum Traction Force - Low Speed | 19064 lb |
Travel Speed - High | 2.9 mile/h |
Travel Speed - Low | 1.6 mile/h |
ALL DAY COMFORT
- A sealed and pressurized cab is equipped with an improved air conditioning system, adjustable wrist rests and a suspension seat to help keep you working comfortably all day long.
EASY TO OPERATE
- Controls are easy to use and the intuitive Next Generation Monitor provides customizable machine operator preferences and easy to read machine information.
STICK STEER TRAVEL MODE
- Moving around the job site is even easier with the Cat Stick Steer option. Easily switch from traditional travel controls with levers and pedals to joystick controls with a push of a button. The benefit of less effort and improved control is in your hands!
BIG PERFORMANCE IN A MINI DESIGN
- Increased lifting, swinging, travel and multi-functioning performance helps you get the job done more efficiently, and blade float allows for easy clean up.
SAFETY ON THE JOB SITE
- Your safety is our top priority. The Cat Mini Excavator is designed to help keep you safe on the job. A back-up camera, courtesy work lights and a fluorescent retractable seat belt are just a few of the safety features we've built into the machine.
SIMPLE SERVICE FOR LESS DOWNTIME
- Maintenance is quick and easy on the Cat Mini Excavator. Routine check points are easy to access at ground level with grouped service points and robust service panels.
LOWER OPERATING COSTS
- Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat Mini Excavator was designed with reducing your operating costs in mind.
UNMATCHED DEALER SUPPORT
- Your Cat dealer is here to help you reach your business goals. From providing equipment solutions to operator training to service needs and beyond, your Cat dealer is ready to help.
SUSTAINABILITY
- The Cat® C3.3B engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
- Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
- Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
- Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
- Cruise control helps you maintain a constant speed as you travel across your jobsite saving fuel and reducing greenhouse gas emissions.
- The Cat® Seat Belt Reminder provides audible and visual warnings to remind operators to buckle up during machine operation. The easy-to-install system is compatible with all equipment brands to help ensure operator safety.
- Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
- Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.(if equipped)
- Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.(if equipped)
- Cat Grade with advanced 2D and 3D technologies combine advanced guidance with optional automated machine control helping you reach grading targets while reducing fuel burn and greenhouse gas emissions by improving efficiency, job site productivity, and accuracy. (if equipped).
*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel. (for use of blends higher than 20% biodiesel, consult your Cat dealer)
Standard Equipment:
-
- Engine
-
- Cat C3.3B Diesel Engine (U.S. EPA Tier 4 Final/EU Stage V) – Electronic Engine, Turbo, Diesel Particulate Filter (DPF)
- Automatic Engine Idle
- Automatic Engine Shutdown
- Automatic Swing Brake
- Automatic Two Speed Travel
- Fuel Water Separator with Indicator
- Radial Seal – Double Element Air Filter
- Extended Life Coolant, –37° C ( –37° F)
-
- Hydraulics
-
- Electronic Variable Displacement Piston Pump
- Load Sensing/Flow Sharing Hydraulics
- Power On Demand
- Hydraulic Temperature Monitoring
- Certified Accumulator
- HYDO Advanced Hydraulic Oil
-
- Operator Environment
-
- TOPS – ISO 12117:1997
- ROPS ISO 12117-2:2008
- Stick Steer Mode
- Travel Cruise Control
- Control Pattern Changer
- Adjustable Wrist Rests
- Molded Footrests
- Removable, Washable Floor Mat
- Travel Pedals and Hand Levers
- Cat Key with Passcode Option
- HVAC with Automatic Temperature Control
- Hydraulic Lockout Controls
- Integrated Lower Front Window
- Assisted Front Window Overhead Storage
- Rear Window Emergency Exit
- Fabric, High Back, Suspension Seat
- Retractable Seat Belt (75 mm/3 in)
- Coat Hook
- Cup Holder
- LED Interior Light
- Literature Holder
- Mounting Bosses for Top and Front Guards
- 12V Power Socket
- Radio – Bluetooth, Auxiliary, Microphone, USB (charging only)
- Skylight
- Signaling/Warning Horn
- Cab and (left side) Boom Work Lights
- Utility Space for Mobile Phone
- Next Generation Color LCD Monitor (IP66)
– Jog Dial Interface
– Fuel Level and Coolant Temperature Gauges
– Maintenance and Machine Monitoring
– Performance and Machine Adjustments
– Numeric Security Code
– Multiple Languages
– Camera Ready (IP68 & IP69K)
– Hour Meter with Wake Up Switch
-
- Undercarriage
-
- Greased and Lubricated Track
- Tie Down Eyes on Track Frame
- Dozer Straight Blade
- Dozer Float
- Bolt-on, Reversible Wear Edge
-
- Boom, Stick And Linkages
-
- One Piece Boom (4300 mm/169.3 in)
- Front Shovel Capable – Pin-on/Manual Coupler/Hydraulic Coupler for Cat Tools (not available in all regions)
- Thumb Ready (not available in all regions)
-
- Electrical
-
- 12 Volt Electrical System
- 90 Ampere Alternator
- 900 CCA Maintenance Free Battery
- Battery Disconnect
- Ignition Key Stop Switch
- Travel Alarm
- Rear Camera
-
- Other
-
- Locks on External Enclosure Doors
- Lockable Fuel Cap
- Beacon Socket
- Rear Reflectors
-
- Guarding
-
- Roll Over Protective Structure (ROPS) ISO 12117-2:2008
- Top Guard ISO 10262:1998 (Level I)
-
- Technology
-
- Product Link Basic
Optional Equipment:
-
- Operator Environment
-
- Push to Start with Bluetooth® Key
- Air Suspension Heated Seat
- Rain Visor
- Next Generation Advanced Monitor (below are all included with Next Generation Advanced Monitor option)
– Touch Screen
– Site Reference System
– High Definition Camera Capable (IP68 & IP69K)
– Numeric Security Code - Seat Belt Reminder System
-
- Undercarriage
-
- Wide Dozer Blade
- Steel Tracks (450 mm/17.7 in wide)
- Wide Steel Tracks (600 mm/23.6 in)
- Steel Track with Rubber Pads
- Track Guides
-
- Boom, Stick And Linkages
-
- Long Stick (2500 mm/98.4 in)
- Attachments including Buckets, Augers and Hammers
- 2nd Auxiliary Hydraulic Lines
- Boom Lowering Check Valve
- Stick Lowering Check Valve
- Certified Lifting Eye
-
- Electrical
-
- Rearview Camera
- Rotating Beacon
-
- Guarding
-
- Top Guard ISO 10262:1998 (Level II)
- Front Guard (Mesh) ISO 10262:1998 (Level I)
- Front Guard (Heavy Duty) ISO 10262:1998 (Level II)
-
- Other
-
- Water Jacket Heater
- Refueling Pump
- Counterweight (250 kg/551 lb)
- Counterweight (500 kg/1103 lb)
-
- Technology
-
- Ease of Use Indicate
- Ease of Use E-Fence
- Cat Grade Advanced 2D
- Cat Grade 3D
- Product Link Elite (regulations apply)