D11 XE

🔍

Description

Technical Specifications

Benefits and Features

Equipment

The Cat^® D11 XE is the most efficient, highest-producing D11 ever. It’s built on a legacy of performance and reliability, with a Caterpillar-designed electric powertrain that improves fuel efficiency and increases productivity.

It’s a flexible machine that can handle any application you throw at it, no matter how harsh the conditions of your site. It’s easier to operate and maintain, and it’s built to last 20% longer between rebuilds. The result? You’ll move more material per hour, use less fuel, produce less greenhouse gas and achieve a lower total cost of ownership.

Engine - U.S. EPA Tier 4 Final/EU Stage V
Engine Model	Cat® C32B
Engine Power - Net SAE J1349/ISO 9249 - Forward	861 hp
Displacement	1959 in³
Engine Power - Net SAE J1349/ISO 9249 - Reverse	956 hp
Note (1)	*Excludes all fan losses.
Note (2)	Engine ratings apply at 1,600 rpm.
Note (3)	Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
Weights
Operating Weight	238794 lb
Operating Weight - Carrydozer	257958 lb
Note (1)	Operating weight includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.
Note (2)	CD Operating Weight includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator.
Dimensions
Ground Clearance*	31.4 in
Track Gauge	114 in
Width - Over Trunnions	172.4 in
Height - FOPS Cab*	173.4 in
Height - Top of Stack*	179.1 in
Height - ROPS/Canopy*	185.9 in
Drawbar Height (Center of Clevis)*	37.1 in
Length - Track on Ground	175 in
Overall Length - Basic Tractor	242.5 in
Length - Basic Tractor - With Drawbar	242.5 in
Length - With SU-Blade**	337.8 in
Length - With U-Blade	340.2 in
Length - With Single-Shank Ripper	319.2 in
Length - With Multi-Shank Ripper	331.8 in
Width - Without Trunnions - Standard Shoe	148.9 in
Note (1)	*Includes grouser height for total dimensions on hard surfaces.
Note (2)	**CD Blade on D11/D11 XE CD
Blades
Semi-Universal (SU)* Capacity	35.6 yd³
Semi-Universal (SU)* Width Over Endbits	219.8 in
U-Blade Capacity	45 yd³
U-Blade Width	249.6 in
Reclamation Universal - Blade capacity (SAE J1265)	55 yd³
Reclamation Universal - Width with blade (over end bits)	251.9 in
Carry Dozer - Blade capacity (SAE J1265)	57 yd³
Carry Dozer - Width with blade (over end bits)	263.9 in
Transmission
1.0 Forward	2.5 mile/h
2.0 Forward	4.4 mile/h
3.0 Forward	7 mile/h
1.0 Reverse	3 mile/h
2.0 Reverse	5.4 mile/h
3.0 Reverse	7 mile/h
Hydraulic Controls
Pump Type	Variable displacement piston pump
Combined Pump Output - Implement	177 gpm
Ripper - Single Shank
Maximum penetration force * (shank vertical)	68195 lb
Maximum penetration depth (standard tip)	63.5 in
Pryout Force	146991 lb
Ripper - Single Shank, Deep Ripping
Maximum penetration force * (shank vertical)	68434 lb
Maximum penetration depth (standard tip)	85.5 in
Pryout Force	146376 lb
Ripper - Multi-Shank, Adjustable Parallelogram
Overall Beam Width	131.1 in
Maximum Penetration Force - Shank Vertical	69112 lb
Maximum Penetration - Standard Tip	43.3 in
Pry-Out Force - Multi-Shank Ripper with One Tooth	144785 lb
Engine - U.S. EPA Tier 2 Equivalent
Engine Model	Cat® C32B
Displacement	1959 in³
Engine Power - Net SAE J1349/ISO 9249 - Forward	861 hp
Engine Power - Net SAE J1349/ISO 9249 - Reverse	959 hp
Note (1)	*Excludes all fan losses.
Note (2)	Engine ratings apply at 1,600 rpm.
Note (3)	Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
Undercarriage
Width - Shoe	28 in
Width - Shoe - CD	36 in
Shoes/Side	41
Grouser Height	4 in
Pitch	12.5 in
Ground Clearance*	30.6 in
Track Gauge	114 in
Length - Track on Ground	175 in
Ground Contact Area	9781 in²
Ground Contact Area - CD	12605 in²
Track Rollers/Side	8
Number of Carrier Rollers	1 per side (optional)
Standards
ROPS	Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008
FOPS	Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II
Sound (1)	The exterior sound pressure level for the standard machine (ISO 6396:2008) is 113 dB(A) (sound suppressed).
Sound (2)	The operator equivalent sound pressure level (ISO 6396:2008) is 76 dB(A) (sound suppressed).
Service Refill Capacities
Cooling System	50.7 gal (US)
Engine Crankcase	35.1 gal (US)
Powertrain	120 gal (US)
Power Train - Refill Volume	109.6 gal (US)
Final Drive - Each	10.6 gal (US)
Roller Frames - Each	24.8 gal (US)
Hydraulic Tank	42.2 gal (US)
Hydraulic System Tank and Chassis	64.7 gal (US)
Hydraulic System Chassis + Blade and Ripper (Standard)	117.6 gal (US)
Hydraulic System Chassis + Blade and Ripper (Carrydozer)	143.4 gal (US)
Fuel Tank Capacities
Fuel Tank - Usable Volume	466 gal (US)
Air Conditioning System
Note (1)	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). See the label or instruction manual for identification of the gas. – If equipped with R-1234yf (Global Warming Potent

Performance & Efficiency

First-of-its-kind electric drive powertrain built on Caterpillar's deep electrification experience

Up to 25% less fuel burned per unit of material moved compared to the D11

Delivers optimized power to the ground, working more efficiently over a wider range of speeds and loads

Single-plane cooling system enables better heat rejection

Multiple blade options and three tilt cylinder options maximize productivity in a wide range of applications

C32B engine delivers the performance you expect with heavier duty internals for improved reliability

High horsepower reverse speeds up non-productive traveling for shorter cycle times

Operator Comfort

Unparalleled operator environment designed to reduce effort and exposure

Intuitive touchscreen display gives operators access to key machine information, giving real-time feedback to optimize productivity

Suspended undercarriage absorbs impact and reduces shock loads by up to 50%

Fully adjustable air suspension seat

Ergonomic controls, including low-effort electronic steering, ripper and dozer controls keep operators in control and reduce fatigue

Reduced noise and vibration, as well as improved airflow for maximum comfort

3 dB quieter than the D11 for both operator and spectators

Safety

Improved operator visibility with clear lines of sight to front and rear work areas, as well as optional 360-degree vision system

Third-generation powered ladder for safer access and egress

Automatic engine shutoff if dozer is tipped or rolls over

Seatbelt monitor and Operator Not Present monitoring system

Ready for Cat MineStar Detect and Command

Technology & Innovation

Autocarry™ provides automatic blade control during carry operations, reducing operator fatigue and increasing productivity up to 15%

Grade Control 3D uses ROPS-mounted GNSS antennas and blade-mounted sensors to increase accuracy, enhance safety, and reduce the number of people required on site

Automated Blade Assist increases efficiency with automated blade movements to preset pitch positions

Automatic Ripper Control monitors and adjusts engine speed and ripper depth to minimize track slip and maximize productivity

Cat MineStar™ Solutions

Terrain for grading provides onboard guidance tools and real-time feedback to help operators maximize efficiency and reduce rehandling of material

Terrain with Blade Control speeds up dozing, decreases fuel burn and minimizes overcut, overfill and rehandling

Command for dozing provides multiple levels of automation, from line-of-sight control of a single machine to semi-autonomous control over multiple dozers from a single remote station

Serviceability

Modular design allows you to service major components without affecting surrounding areas

Electric drive powertrain features 60% fewer parts and requires less frequent replacement of major components

Lower high-idle engine speed reduces wear and tear for enhanced machine life

Increased planned component repair time from 15,000 to 18,000 hours

Automatic machine protection features keep the machine from damaging itself due to environmental factors or improper operation

Blades & Attachments

Best-in-class attachments designed with decades of experience in research and development

All blades are constructed of high-tensile-strength materials for high productivity over a long life

29.3° interior angle between the back bottom of the blade and the ground allows blades to better penetrate and load in tough conditions

Superior loadability with heavy moldboard construction and bolt-on hardened cutting edges and end bits

Built to Go The Distance

Frame, powertrain and major components are built to be rebuilt using new, remanufactured or rebuilt parts and components

Longer rebuild intervals — achieves the same operating hours in an average 75,000-hour lifecycle with one fewer rebuild than the D11

Robust variable piston pumps in the load-sensing hydraulic system run cooler for longer component and seal life

Mining For a Better World

Electric drive powertrain reduces fuel consumption and greenhouse gas emissions with no impact on machine performance

Built to be rebuilt, allowing you to achieve like-new performance at a far lower cost in energy, emissions and materials than using new components

C32B engine meets U.S. EPA Tier 4 Final, EU Stage V and other equivalent emissions standards

Maintenance-free diesel oxidation catalyst aftertreatment solution eliminates the need for DEF and reduces total fluid consumption

Standard Equipment:

Operator Environment
- ROPS/FOPS, Sound-Suppressed Cab
- High-Definition Primary Touchscreen Display
- Visibility – Rearview Mirrors
- Air Conditioner and Heater with Automatic Climate Control
- Seat – Cloth with Air suspension
- Cab Glass – Single-Pane Tinted Safety
- Cab Access – Blade Push Arm Steps and Grab Handle
Cat Technology Products
- VIMS
- Automated Blade Assist (ABA)
- Cat Product Link^™ Elite (cellular)
Cat Power Train
- Cat C32B Engine – U.S. EPA Tier 4 Final/EU Stage V
- High-Performance Single-Plane Cooling Module
- Variable Speed Dual Path Electric Drive
- Tiller Steering – Electronic Control
Undercarriage
- Suspension Type Undercarriage
- Sleeve Bearing Track
- Lifetime-Lubricated Rollers and Idlers
- Track Shoes (ES): 710/810/915 mm (28/32/36 in) Width (various configurations)
Hydraulics
- Electronically Controlled, Load-Sensing Dozer Lift and Tilt
- Electronically Controlled, Load-Sensing Ripper Lift and Pitch
- Dozer Blade – Dual Tilt
- Electronically Enabled Blade – Quick Drop
Electrical
- 24V Electric Start, Dual Starters
- Batteries – 4 × 4,200-Amp Hour, 12V
- Battery Isolation
- Lights – LED – 13 Positions
Service And Maintenance
- Ecology Fluid Drains – All Compartments
- Hinged Bottom Guards
- High-Speed Oil Change – Engine and Transmission
- Ground-Level Fast Fuel Fill
- Ground-Level Electrical Service Station
- S·O·SSM Fluid Sampling Ports
- Diagnostic Connector