D1 Dozer

🔍

Description

Technical Specifications

Benefits and Features

Equipment

360 View

The Cat® D1 delivers superior performance and the broadest choice of technology features to help you get the most from your dozer. Nimble and responsive, it has power for dozing and finesse for grading. Fully hydrostatic transmission gives you seamless acceleration, so you can get the job done quickly. The load sensing system automatically optimizes ground speed based on load, for the greatest productivity and fuel efficiency.

Engine
Engine Model	Cat C3.6
Power - Net	80 HP
Displacement	220 in³
Net Power - 2,200 rpm - SAE J1349	80 HP
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269	80 HP
Note (1)	Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the ﬂywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Note (2)	All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
Weights
Operating Weight	17855 lb
Weights
Operating Weight - LGP	18839 lb
Note (1)	Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
Operating Weight - LGP, 762 mm/30 in	19295 lb
Note (2)	For machine with ripper, add 554 kg (1,222 lb).
Transmission
Drive Pumps	1
Maximum Travel Speed - Reverse	6.2 mile/h
Relief Valve Settings	7033 psi
Maximum Travel Speed - Forward	5.6 mile/h
Track Motors	2
Hydraulic Controls
Pump Output	17.2 gal/min
Relief Valve Settings	2988 psi
Ripper
Type	Parallelogram
Number of Shanks	3
Height	6.5 in
Weight	1222 lb
Maximum Ground Clearance Under Tip	17.6 in
Maximum Digging Depth	13.3 in
Overall Width	67.3 in
Maximum Reach - Ground Line	30.2 in
Engine
Power Train	Hydrostatic
Cab
FOPS	ISO 3449:2005 Level II
ROPS	ISO 3471:2008
Undercarriage
Length - Track on Ground - LGP, 762 mm (30 in)	89 in
Length - Track on Ground - LGP	89 in
Track Gauge - LGP	68 in
Shoe Width - LGP, 762 mm (30 in)	30 in
Track Gauge - LGP, 762 mm (30 in)	73 in
Shoe Width - LGP	25 in
Track Gauge	59 in
Shoe Width - Standard	16 in
Ground Pressure - LGP	4.3 psi
Ground Pressure - LGP, 762 mm (30 in)	3.7 psi
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage	43
Number of Rollers - Each Side	6
Undercarriage
Length of Track on Ground	89 in
Number of Shoes - Each Side - Abrasion Undercarriage	38
Ground Pressure	6.45 psi
Service Refill Capacities
Final Drive - Each - LGP	2.6 gal (US)
Cooling System	4.2 gal (US)
Diesel Exhaust Fluid (DEF) Tank	4.9 gal (US)
Transmission - Hydraulic Tank	23.8 gal (US)
Crankcase - With Filter	2.8 gal (US)
Fuel Tank	51.5 gal (US)
Service Refill Capacities
Final Drives - Each Side	2.6 gal (US)
Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the ﬂuorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Dimensions
BLADE: Blade Capacity (SAE) - LGP	2.17 yd³
BLADE: Blade Lift Height - LGP	28.7 in
BLADE: Maximum Tilt - LGP	17.2 in
BLADE: Blade Width - LGP	124 in
Ground Clearance - LGP	13 in
BLADE: Blade Width at Maximum Angle - LGP	113.1 in
BLADE: Digging Depth - LGP	23 in
Track Gauge - LGP	67.9 in
Ground Clearance - LGP, 762 mm (30 in)	13 in
BLADE: Blade Height - LGP	33.8 in
Overall Length - With Blade - LGP, 762 mm (30 in)	167.8 in
Track Gauge - LGP, 762 mm (30 in)	73 in
BLADE: Blade Cutting Edge Angle, Adjustable - LGP	52° to 58°
BLADE: Maximum Angle (either side) - LGP	25°
Overall Length - With Blade - LGP	167.8 in
Note	*Abrasion Undercarriage
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in)	129.6 in
Width of Dozer (standard shoes, no blade) - Standard	74.8 in
Length of Basic Dozer (without blade) - Standard	129.6 in
Length of Basic Dozer (without blade) - LGP	129.6 in
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in)	94.9 in
Dozer Height - LGP	108.9 in
Width of Dozer (standard shoes, no blade) - LGP	92.9 in
Dozer Height - LGP, 762 mm (30 in)	108.9 in
Dozer Height - Standard	108.9 in
Dimensions
BLADE: Blade Width at Maximum Angle - Standard	95.2 in
BLADE: Digging Depth - Standard	23.2 in
BLADE: Blade Width - Standard	104.2 in
BLADE: Blade Lift Height - Standard	28.7 in
Ground Clearance - Standard	13 in
BLADE: Blade Cutting Edge Angle, Adjustable - Standard	52° to 58°
BLADE: Maximum Angle (either side) - Standard	25°
BLADE: Maximum Tilt - Standard	14.5 in
BLADE: Blade Capacity (SAE) - Standard	1.99 yd³
Track Gauge - Standard	58.9 in
BLADE: Blade Height - Standard	35.8 in
Overall Length - With Blade - Standard	168 in
Note	With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
Retrieval Winch
Weight	1747 lb
Maximum Line Pull - Full Drum	79 ft/min
Drum Capacity - Recommended Cable	277 ft
Maximum Line Pull - Bare Drum	50 ft/min
Drum Capacity - Optional Cable	195 ft
Maximum Line Speed - Full Drum	20350 lb
Control	Hydraulic
Maximum Line Speed - Bare Drum	32150 lb
Rope Diameter - Optional	0.75 in
Winch Drive	Hydraulic
Rope Diameter - Recommended	0.63 in
Speed	Variable
Drum Diameter	8 in
Drum Width	9.65 in
Throat Clearance	5.6 in
Winch Length	35.63 in
Overall width	27.91 in
High Performance Winch
Weight	1345 lb
Drum diameter	10 in
Winch drive	Hydrostatic
Winch length	27.76 in
Maximum line pull – bare drum	40000 lb
Maximum line speed – full drum	207 ft/min
Drum width	10.8 in
Drum capacity – optional	256 ft
Rope diameter – recommended	0.63 in
Maximum line pull – full drum	25000 lb
Rope diameter – optional	0.75 in
Speed	Variable
Maximum line speed – bare drum	131 ft/min
Throat clearance	6.75 in
Drum capacity – recommended cable	371 ft
Overall width	29.2 in
Control	Hydraulic

IMPROVED VISIBILITY

The sloped hood provides better visibility to the work in front of the blade as well as the overall job site. Better visibility can equal less operator fatigue and more confidence in your work.

ENHANCED TECHNOLOGY

Cat small dozers include a suite of Operator Assist, Grade, and Cat Command Features that work seamlessly to save time, effort, fuel, machine wear and overall cost.

Stable Blade Lift and Tilt automatically works behind the scenes to allow operators to create smooth surfaces with less effort using accelerometers on the blade and chassis with an advanced algorithm to make minor blade raise and lower movements.
Blade Load Monitor provides real-time feedback of current load vs. target load to fully utilize machine capacity benefiting operators of all skills levels. Automatically compensates for ground conditions. This feature is not available indoors or in areas where a GPS signal is not available.
Low Slip Traction Control prevents excessive track slip to improve machine efficiency and reduce burden on the operator. Feature offers two modes: Normal Mode helps when pushing heavy blade loads by limiting non-productive track slip, recommended for most applications. And Low Slip Mode limits track slip for applications sensitive to slip such as spreading material on top of a liner, select this mode when needed.
AutoCarry™ raises and lowers the blade to maximize pushing capability and prevent excessive track slip when pushing heavy loads. Feature is designed to work in unison with other Operator Assist Features. Not available indoors or in areas where a GPS signal is not available.
Scalable 2D and 3D Cat Grade is an optional feature that makes your job up to 39% faster with up to 82% fewer operator inputs and less rework by maintaining blade angles for better surface quality – even with less experienced operators.
Cat Command remote control is an optional feature that takes you off the machine and away from hazardous conditions, dust, noise or vibration or operating on unstable surfaces. Eliminates risk of injury from climbing on or off the machine. Integrated with dozer systems, Cat Command enables smooth, precise control with access to all machine functions and advanced features (if equipped) for maximum efficiency and productivity.

UP TO 10% IMPROVED FUEL ECONOMY

The D1 features the lowest fuel consumption in this size class with the same great performance you've come to expect. Up to 20% improvement and no performance sacriﬁce when ECO mode is active.

COMFORTABLE WORK SPACE

The spacious and comfortable cab features an optional heated and ventilated seat, along with heated joystick controls to make the operator comfortable no matter what the conditions are outside. The seat height and armrests can be easily adjusted to the operator’s preference.

BIGGER, BETTER DISPLAY WITH CAMERA

This new and improved optional 10 in (254 mm) touchscreen, color display is easy to use, with a great view of machine settings, rearview camera and Slope Indicate/Slope Assist screens. The large reversing camera gives the operator better visibility to the job site.

DURABLE UNDERCARRIAGE

The D1 is available with either a Sealed and Lubricated Track (SALT) or Abrasion undercarriage to best suit your application. The undercarriage has a longer life resulting in less down time. A one piece mainframe/track roller frame design and the large, double reduction planetary final drive allow the machine to push heavy loads.

SUSTAINABILITY

The Cat® C3.6 engine meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014, and Korea Tier 5 emission standards.
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
Auto Engine Speed Control helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
Cat® Grade with Slope Assist™ helps you avoid costly rework and wasteful fuel burn and greenhouse gas emissions by automating your blade position without a GPS signal.
Cat® Grade with 3D automates blade movements using a GPS signal helping you follow a grade design, reducing fuel burn and greenhouse gas emissions by improving efficiency and accuracy.
Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
VisionLink® displays the CO2 emissions for monitored assets, calculated by fuel type for the Runtime Fuel Burned each day in a selected date range.
Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.
Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.

*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel.

Standard Equipment:

Power Train
- Air cleaner with precleaner, automatic dust ejection and underhood intake
- Aluminum bar plate cooling system (radiator, power train)
- Automatic traction control
- Cat^® C3.6 diesel engine
- Drive, auxiliary
- Dual path, closed loop, hydrostatic transmission
- Electric fuel pump
- Fuel/water separator
- Turbocharged aftercooled
Electrical
- Alarm, backup
- Alternator, 150 amp, heavy duty
- Batteries, heavy duty, maintenance free, 1,000 CCA
- Diagnostic connector
- Four integrated front halogen lights, two rear halogen
- Horn, electric
- Starter, electric, 12 V, heavy duty
Undercarriage
- SALT undercarriage (43 section)
- Carrier rollers
- Guards, front/rear guiding
- Six roller track frame
- Track adjusters, hydraulic
- Track rollers, lifetime lubricated
Hydraulic
- Hydraulic pump and oil
- Single lever, three function control
- Three valve hydraulics
Cat Technology
- Low Slip Traction Control (included with ARO and Cat Grade 3D)
- Slope Indicate
- Stable Blade Lift and Tilt (included with ARO and Cat Grade 3D)
- Compatibility with radios and base stations from Trimble, Topcon, and Leica
- Capability to install 3D grade systems from Trimble, Topcon, and Leica
Attachments
- Rigid drawbar
- Front pull device
Operator Environment
- Armrests, adjustable
- Coat hook
- Controls, seat mounted, fore/aft adjustment
- Cup holders
- Eco Mode
- Electronic Monitoring system with gauge:
  – Chassis slope indication
  – Diesel exhaust fluid (DEF)
  – Engine coolant temperature
  – Fuel level
  – Hydraulic oil temperature
- Electronic security system
- Engine air cleaner service indicator
- Engine RPM and gear display
- Floor mat, rubber, heavy duty
- Foot pads, dash
- Hour meter, electronic
- Independent forward/reverse speed settings
- Mirror, rearview, inside
- Power port, 12 volt
- ROPS/FOPS canopy
- Seat, air suspended, cloth or vinyl
- Seatbelt, hi-vis retractable 76 mm (3")
- Seatbelt buckling indicator/reminder
- Single pedal combining decel and brake functions
- Speed recall
- Storage compartment
- Throttle switch, rotary
- Travel speed limiter, electronic