🔍
S385C Shear
| Dimensions | |
| Cycle Time - Close | 5 Seconds |
| Height | 84 in |
| Jaw Depth | 35 in |
| Jaw Width - Fixed | 18 in |
| Jaw Width - Moving | 6 in |
| Length | 168 in |
| Width | 55 in |
| Cutting Circuit - Maximum Flow | 182 gal/min |
| Apex Force | 528 Sh Ton |
| Weight - Stick Mount | 18345 lb |
| Throat Force | 1405 Sh Ton |
| Jaw Opening | 34 in |
| Cutting Circuit - Maximum Relief Pressure | 5076 psi |
| Shear Arm Torque | 2050000 lb/ft |
| Weight - Boom Mount | 17580 lb |
| Tip Force | 279 Sh Ton |
| Rotation Circuit - Maximum Relief Pressure | 2030 psi |
| Rotation Circuit - Maximum Flow | 21 gal/min |
Bolt-On Piercing Tip
Piercing tip is bolt-on for rapid maintenance and low operating cost. Tip is fully reversible, giving two uses per set.
Jaw Design
Unique straight lower jaw design effectively enhances the cutting force by facilitating the spreading out of steel along the length of the jaw, maximizing the shear cutting force.
360-degree Rotation
Operator can spin the jaws 360 degrees in either direction to quickly position the jaws for a cut.
Reversible Knives
The four main, side and front knives are fully reversible with four effective cutting edges.
Easy Maintenance
Large access panels on the top, bottom, and sides of the shear housing make it easier to service inside components.
Protected Cylinder
Design of the shear housing provides full protection of the cylinder throughout the complete cutting cycle.
Completely Cat
Only Caterpillar offers an integrated machine-hydraulics-shear system supported by Caterpillar from front to end, throughout the life of the system.
