.
🔍
🔍
Description
Technical Specifications
Benefits and Features
In face conveyor or plow automation systems the Cat® PMC-V provides the human machine interface (HMI) to interact with the PMC-D drive controls to operate manual mode, visualize and change parameters and show actual process values. Withina PMC-D system minimum one and typically up to 3 PMC-Vs are inequal operation.
| Components | |
| Operating System | µITRON RTOS |
| Processor | 32Bit RISC Microcontroller TX1940CYAF, 32MHz, internal RAM 10Kbytes, ROM 256Kbytes |
| RAM Memory | 4Mbytes CMOS Static RAM, 4Mbytes Flash |
| Electrical Sockets | |
| Socket 8 - Pin 3 | +8.2 V |
| Socket 8 - Pin 4 | GND |
| Socket 5 - Pin 4 | Options |
| Socket 1 - Pin 2 | Relay Contact NO: a |
| Socket 11 - Pin 4 | Options |
| Socket 1 - Pin 1 | Optocoupler Anode |
| Socket 2 - Pin 4 | GND |
| Socket 9 - Pin 2 | Measurement Input 2 |
| Socket 11 - Pin 3 | Options |
| Socket 4 - Pin 4 | GND |
| Socket 3 - Pin 1 | +12 V (B) |
| Socket 3 - Pin 4 | GND |
| Socket 9 - Pin 4 | GND |
| Socket 4 - Pin 1 | +12 V (C) |
| Socket 7 - Pin 1 | +12 V Input |
| Socket 4 - Pin 3 | Serial Interface: TxD |
| Socket 6 - Pin 3 | Profibus: b (internal) |
| Socket 4 - Pin 2 | Serial Interface: RxD |
| Socket 9 - Pin 3 | +8.2 V |
| Socket 1 - Pin 3 | Relay Contact NO: b |
| Socket 2 - Pin 1 | +12 V (A) |
| Socket 9 - Pin 1 | +12 V (C) |
| Socket 11 - Pin 2 | Options |
| Socket 10 - Pin 3 | +8.2 V |
| Socket 10 - Pin 1 | +12 V (A) |
| Socket 3 - Pin 2 | Serial Interface: RxD |
| Socket 3 - Pin 3 | Serial Interface: TxD |
| Socket 1 - Pin 4 | Optocoupler Kathode |
| Socket 10 - Pin 4 | GND |
| Socket 5 - Pin 1 | Options |
| Socket 7 - Pin 2 | Serial Interface: TxD |
| Socket 12 - Pin 3 | Profibus: b (internal) |
| Socket 12 - Pin 2 | Profibus: a (internal) |
| Socket 2 - Pin 2 | Serial Interface: RxD |
| Socket 7 - Pin 3 | Serial Interface: RxD |
| Socket 6 - Pin 2 | Profibus: a (internal) |
| Socket 5 - Pin 2 | Options |
| Socket 5 - Pin 3 | Options |
| Socket 7 - Pin 4 | GND Input |
| Socket 8 - Pin 2 | Measurement Input 1 |
| Socket 10 - Pin 2 | Measurement Input 3 |
| Socket 2 - Pin 3 | Serial Interface: TxD |
| Socket 11 - Pin 1 | Options |
| Socket 8 - Pin 1 | +12 V (B) |
| Options (Designations of options equal the second and third to last characters of type designation listed on equipment) | |
| Socket 11 - Pin 3 (2) | ** |
| Socket 11 - Pin 2 (2) | ** |
| Socket 5 - Pin 1 (1) | AB |
| Socket 5 - Pin 4 (1) | AB |
| Socket 11 - Pin 2 (1) | AB (Profibus: a [external]) |
| Socket 11 - Pin 3 (1) | AB (Profibus: b [external]) |
| Socket 5 - Pin 2 (2) | ** |
| Socket 11 - Pin 1 (2) | ** |
| Socket 5 - Pin 1 (2) | ** |
| Socket 11 - Pin 4 (1) | ** |
| Socket 5 - Pin 2 (1) | AB (Profibus: a [external]) |
| Socket 5 - Pin 4 (2) | ** |
| Socket 11 - Pin 4 (2) | AB |
| Socket 5 - Pin 3 (2) | ** |
| Socket 11 - Pin 1 (1) | AB |
| Socket 5 - Pin 3 (1) | AB (Profibus: b [external]) |
| Global Certifications | |
| Types (4) | Australia: IECEx, ANZEx |
| Types (5) | China: MA |
| Types (1) | Europe: ATEX |
| Types (2) | U.S.: MSHA |
| Types (6) | Russia: GOST |
| Types (3) | More certifications on demand |
| Environmental Data | |
| Temperature - Symbol | Tamb |
| Temperature - Typical Value | 68 °F |
| Temperature - Maximum Ratings | -20° C - +40° C (-4° F - +104° F) |
| Electrical Data | |
| Supply Voltage - Maximum Ratings | 9.5 V - 13.2 V |
| Supply Current - Maximum Ratings | 1.5 A |
| Supply Current - Typical Value | 1 A |
| Supply Voltage - Typical Value | 12 V DC |
| Main Technical Data | |
| Components (5) | Power: 12 W |
| Components (1) | 320 × 240 pixel b/w graphics display |
| Components (3) | Optional additional Profibus communication channel for communication with third party computer |
| Components (4) | 12 SKK24 sockets for power supply, communication, sensors and actuators |
| Components (2) | IP 68 |
| Dimensions (Approximate) | |
| Length | 13.19 in |
| Height | 5.83 in |
| Width | 9.49 in |
- Human machine interface for configuration and customization of the PMC-D/V family
- Diagnostic features for whole system
- Process visualization
- Change of parameters
- Communication link to other systems
- Additional sensor inputs
