PM313 Wheel Undercarriage Cold Planer

🔍

Description

Technical Specifications

Benefits and Features

Equipment

360 View

The PM313 is an efficient, highly maneuverable milling machine with a cutting width of 1300 mm (51.2 in) that performs controlled full-depth removal of asphalt and concrete pavements in a single pass.

Cutting System
Milling Width	51.2 in
Maximum Milling Depth	13 in
Rotor Speeds	97 / 109 / 121 rpm
Number of Bits	111
Power Train
Rated Power	336.6 hp
Engine	C9.3
Maximum Travel Speed	4.7 mile/h
Maximum Milling Speed	108 ft/min
Weights
Operating Weight	47115 lb
Transport Weight	43561 lb
Dimensions
Operating Length - Conveyor Up	36.45 ft
Operating Width	8.33 ft
Height - Canopy	12.3 ft
Maximum Truck Clearance	15.42 ft
Minimum Right Cutting Radius	6.56 ft
Minimum Left Cutting Radius	13.88 ft
Conveyor Swing	60 degrees from center
Transport Length	30.58 ft
Transport Width	8.33 lb/in
Transport Height	9.84 ft
Service Refill Capacities
Cooling System	16.4 gal (US)
Water Spray System Tank	332.9 gal (US)
Diesel Exhaust Fluid (DEF) Tank	5.8 gal (US)
Engine Oil	7.9 gal (US)
Fuel Tank	158.5 gal (US)
Hydraulic Tank	15.6 gal (US)

Efficient Performance

Cat® C9.3 engine meets regional emission standards
Smooth and efficient operation with Automatic Idle Control and multiple rotor speeds optimize output and demand on the engine
High capacity cooling system keeps engine at ideal temperatures for optimal fuel efficiency and lower emissions
Automatic load sensing on the rotor adjusts milling speed to prevent stalls and optimize production

Maneuverability and Control

Robust propel system features dual displacement planetary motors at each leg post, utilizing a cross-drive pattern for additional traction in straight cuts
Automatic traction control maintains consistent speed in the most challenging applications
Articulating right rear leg maximizes stability and traction in demanding cuts while enhancing flush cutting capability when needed
Optional ballast weight kit available to increase productivity in specific applications
Wheel or track undercarriage options offer a balance of traction, speed and maneuverability
Reliable track undercarriage option leverages proven designs from Cat dozers and an automatic tensioning system to ensure consistent performance and longer track life
Ability to electronically switch between rotor speeds during operation

Comfortable Work Environment

Operate in comfort with a standard suspension seat, adjustable right arm console and intuitive, ergonomic controls
A sliding operator station extends up to 215 mm (8.5 in) to provide improved visibility to the cutting edge
Work day or night with backlit keypads and well-lit work areas
Touchscreen displays provide access to gauge cluster, operating information, remote camera feeds, machine controls and diagnostics
Optional remote cameras enhance visibility to the cutting edges, conveyor, and rear of the machine
Cut closer to obstacles on the right side using an optional remote camera above the cutter box with an adjustable on-screen guidance line
Optional windscreens can be added for increased comfort
Maximize dust removal from the working areas with the optional dust abatement system

Durable Cutting System

The rotor drive system features a heavy-duty dry clutch, dual stage belt drive and automatic belt-tensioning to prevent slippage
Reinforced cutting chamber offers enhanced durability
Hardened full length side plate skis and anti-slab shoes reduce wear and maintenance

Boost Precision with Integrated Cat Technology

Achieve accurate, repeatable and automatic cutting precision with the integrated Cat GRADE with Grade and Slope system
The optional grade control box can be positioned in the operator station or on the back of the machine to enable interaction with the grade system from the ground level
Obtain full control of grade and slope from any control box
Seamlessly switch between multiple grade sensors for uninterrupted accuracy during milling
Adjust the speed at which the rotor drops into the cut for optimal machine control
Set and automate transitions in/out of cuts and save settings for future jobs
Clear obstacles in the cutting path with ease using the obstacle jump feature
Enhance for full 3D milling operation (additional hardware required)

System K Rotors

Cat System K rotors feature efficient material flow with an excellent cutting pattern for numerous applications
A tapered dual-retention design secures toolholders in place without a retaining pin, bolt or setscrew, speeding up replacement and eliminating the need for fasteners or torqueing
Reversible paddles and high strength alloys reduce wear and abrasion to extend rotor life
Optional diamond bits can extend replacement intervals up to 80 times longer than conventional carbide bits

Simplified Service

Maintenance is easier with large service doors for access to critical components
Maintenance-free track components and easy to replace track pads lower service costs
Standard ground-level controls and an optional hydraulically-operated rotor turning device simplify bit removal and replacement
Operate select machine functions during maintenance and service with the accessory drive system
Electrical system wiring is color-coded and numbered for easy identification and wrapped in a protective, abrasion-resistant nylon braid for longer life
Extended hydraulic oil service intervals: 3000 hours without oil sampling, 6000 hours with oil sampling
Track scheduled maintenance with Cat Product Link™ telematics services
Electronic Control Modules (ECMs) monitor machine systems to alert the operator of performance issues and can be paired with Product Link options to enable additional remote services with your local Cat dealer
Multi-piece, cartridge-style engine filters are environmentally friendly, reducing waste and lowering replacement costs
Convenient parts availability, dealer locations and service repair kits simplify ordering of high wear components

Standard Equipment:

Operator Environment
- Sliding operator station
- Suspension seat
- Ground control keypad
- Single high-resolution LCD touchscreen display
- 12-volt power receptacle
Cat Connect Technology
- Remote Troubleshoot capability
- Cat Product Link
- Cat GRADE
Conveyor
- Material removal boost feature
Rotor System
- Automatic plunge-cut
- Automatic transition feature
- Obstacle jump
- Three cutting speeds
- System K Rotor - Standard (15 mm)
Powertrain
- Auto engine idle control
- High capacity cooling system
- Automatic load control
- Wheel undercarriage
Hydraulic System
- Traction control
Service And Maintenance
- Ports for Scheduled Oil Sampling (S·O·S℠)
- Platform-level engine oil dipsticks
- 1260 L (333 gal) onboard water tank
- Side water fill valve
- Water spray system
Safety And Security
- Platform handrails
- Signaling/warning horn
- Halogen work lighting