PM310 Track Undercarriage Cold Planer

🔍

Description

Technical Specifications

Benefits and Features

Equipment

360 View

The Cat PM310 is an efficient, highly maneuverable milling machine with a cutting width of 1000 mm (39.4 in) that performs controlled full-depth removal of asphalt and concrete pavements in a single pass. Integrated Cat GRADE and the latest System K rotors deliver performance, productivity and cutting precision. A comfortable operator environment puts intuitive controls at your fingertips, while long service intervals and easy maintenance access simplifies service. While designed for a single operator, the PM310 includes added features for supporting ground personnel. Many options are available to enhance machine versatility when optimum maneuverability or high production capabilities are required.

Cutting System
Milling Width	39.4 in
Maximum Milling Depth	13 in
Rotor Speeds	97 / 109 / 121 rpm
Number of Bits	91
Power Train
Rated Power	343 hp
Engine	C9.3B
Maximum Travel Speed	3.4 mile/h
Maximum Milling Speed	108 ft/min
Weights
Operating Weight	46770 lb
Transport Weight	45869 lb
Dimensions
Operating Length - Conveyor Up	36.45 ft
Operating Width	8.33 ft
Height - Canopy	12.3 ft
Maximum Truck Clearance	15.42 ft
Minimum Right Cutting Radius	6.3 ft
Minimum Left Cutting Radius	13.58 ft
Conveyor Swing	60 degrees from center
Transport Length	30.58 ft
Transport Width	8.33 lb/in
Transport Height	9.84 ft
Service Refill Capacities
Water Spray System Tank	332.9 gal (US)
Hydraulic Tank	14.5 gal (US)
Diesel Exhaust Fluid (DEF) Tank	12.4 gal (US)
Engine Oil	7.9 gal (US)
Cooling System	16.9 gal (US)
Fuel Tank	137.9 gal (US)

Efficient Performance

Cat® C9.3B engine meets U.S. EPA Tier 4 Final, EU Stage V, and Korea Stage V emission standards and offers increased power density with improved electronic, fuel, and air systems

Engine Idle Speed Management and multiple rotor speeds optimize output and demand on the engine

Variable speed cooling fan operates at the lowest possible speed for optimal cooling

Automatic load sensing on the rotor adjusts milling speed to prevent stalls and optimize production

Maneuverability and Control

Robust propel system features dual displacement motors at each leg post, utilizing a cross-drive pattern for additional traction in straight cuts

Automatic traction control helps reduce track slip consistent speed in the most challenging applications

Articulating right rear leg maximizes stability and traction in demanding cuts while enhancing flush cutting capability when needed

Optional ballast weight kit available to increase productivity in specific applications

Wheel or track undercarriage options offer a balance of traction, speed and maneuverability

Reliable track undercarriage option leverages proven designs from Cat 307 and 308 mini excavators and an automatic tensioning system to ensure consistent performance and longer track life

Ability to electronically switch between rotor speeds during operation

Highly Effective Material Removal

High-capacity conveyors provide efficient removal of milled material with outstanding discharge control

A wide opening and seamless belt effectively clear the rotor chamber

Adjust the belt speed to match material type and production rate

The belt reverses for quick clean out, while magnetic vinyl covers provide quick access to inspect and clean the rollers

Durable Cutting System

The rotor drive system features a heavy-duty dry clutch, dual stage belt drive and automatic belt-tensioning to prevent slippage

Reinforced cutting chamber offers enhanced durability

Hardened full length side plate skis and anti-slab shoes reduce wear and maintenance

High Production System K Rotors

Cat System K rotors feature efficient material flow with an excellent cutting pattern for numerous applications

A tapered dual-retention design secures toolholders in place without a retaining pin, bolt or setscrew, speeding up replacement and eliminating the need for fasteners or torquing

Toolholders, base blocks and kicker paddles are built from high strength alloy steel that’s abrasion resistant for extended life

Optional diamond bits can extend replacement intervals up to 40 times longer than conventional carbide bits

Comfortable Work Environment

Operate in comfort with a standard suspension seat, adjustable right arm console and intuitive, ergonomic controls

A sliding operator station extends up to 215 mm (8.5 in) to provide improved visibility to the cutting edge

Work day or night with backlit keypads and illuminate the work area around the machine with wide-dispersion LED or halogen lighting options

Touchscreen displays provide access to gauge cluster, operating information, remote camera feeds, machine controls and diagnostics

Optional remote cameras enhance visibility to the cutting edges, conveyor, and rear of the machine

Cut closer to obstacles on either side using optional remote cameras with adjustable on-screen guidance lines

An optional hydraulically powered canopy with extendible wing and handrail-mounted windscreen protect the operator from sun, wind, and rain

Better direct exhaust up and away when milling close to buildings or ground personnel with the optional and stowable exhaust diverter

Maximize dust removal from the working areas with the optional dust abatement system

Integrated Cat Technology

Achieve accurate, repeatable and automatic cutting precision with the integrated Cat Grade and Slope system

The optional grade control display can be positioned in the operator station or on the back of the machine to enable interaction with the grade system from the ground level

Obtain full control of grade and slope from any machine display

Easily adjust grade control values and sensors through the highly intuitive touchscreen interface

Adjust the speed at which the rotor drops into the cut for optimal machine control

Set and automate transitions into/out of cuts and save settings for future jobs

Clear obstacles in the cutting path with ease using the obstacle jump feature

Enhance for full 3D milling operation (additional hardware required)

Simplified Service, Low Maintenance Costs

Maintenance is easier with large service doors for access to critical components

Maintenance-free track components and easy to replace track pads lower service costs

Standard ground-level controls and an optional hydraulically operated rotor turning device simplify bit removal and replacement

The accessory drive system allows use of select machine fuctions when the engine is turned off

Electrical system wiring is color-coded and numbered for easy identification and wrapped in a protective, abrasion-resistant nylon braid for longer life

Monitor fluid conditions with regular sampling to help extend change intervals up to 500 hours engine oil, 6000 hours hydraulic oil and 12000 hours coolant

Electronic Control Modules (ECMs) monitor machine systems to alert the operator of performance issues

VisionLink® takes the guesswork out of managing your entire fleet–regardless of size or equipment manufacturer*–by providing maintenance needs, machine hours, location, fuel usage, idle time, diagnostic codes, and more through interactive dashboards on your mobile device or desktop, helping you make informed decisions that lower costs, simplify maintenance, and improve safety and security on your jobsite

Remote Flash allows you to update onboard software without a technician being present, allowing you to initiate software updates when convenient, increasing your overall operating efficiency**

Remote Troubleshoot allows your Cat dealer to perform diagnostic testing on your connected machine remotely**

Convenient parts availability, dealer locations and service repair kits simplify ordering of high wear components

* Data field availability can vary by equipment manufacturer and is provided through an application programming interface (API).
** Must be within cell range coverage.

Sustainability

The Cat C9.3B engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Stage V emission standards

Cat U.S. EPA Tier 4 Final, EU Stage V, and Korea Stage V Final diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels* up to: 20% biodiesel FAME (fatty acid methyl ester) or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.

Engine Idle Speed Management helps maximize fuel efficiency and reduce greenhouse gas emissions by elevating engine speed to an intermediate idle to complete specific tasks and returning to low idle when finished.

Automatic Load Control helps you save fuel and reduces greenhouse gas emissions by automatically matching milling speed to engine load for maximum production at peak efficiency.

Standby/Resume pauses major machine functions and lowers engine speed to conserve fuel and helps reduce greenhouse gas emissions during truck exchanges.

Traction Control maintains consistent traction to increase machine efficiency, helps reduce fuel burn and greenhouse gas emissions.

Cat Scheduled Oil Sampling (S•O•S^SM) Services helps reveal excessive wear, contaminated fluids or other “unseen” issues that can shorten component life. In many cases, you can extend oil and coolant change intervals by using fluid monitoring. Consult your Cat dealer or the machine’s operation and maintenance manual for more information.

Cat Grade with Grade and Slope for cold planers allows for accurate material planning to help reduce overages during the paving process and increase final project quality for a longer lasting road surface.

Don’t waste fuel idling. Cat VisionLink online fleet monitoring helps you manage idle time and reduce fuel burn and greenhouse gas emissions.

VisionLink displays the CO2 emissions for monitored assets, calculated by fuel type for the Runtime Fuel Burned each day in a selected date range.

* Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.

Standard Equipment:

Note
- Standard and optional equipment may vary. Consult your Cat dealer for details.
Operator Environment
- Sliding operator station
- Suspension seat
- Ergonomically adjustable arm rest
- Ground control keypad
- High-resolution LCD touchscreen display
- 12-volt power receptacle
Cat Connect Technology
- Remote Flash
- Remote Troubleshoot
- Cat Grade with Grade and Slope
- VisionLink^® telematics
Rotor System
- Automatic plunge-cut
- Automatic grade and slope transition feature
- Obstacle jump
- Three cutting speeds
Powertrain
- Engine Idle Speed Management
- High capacity cooling system
- Automatic Load Control
Hydraulic System
- Traction control
Service And Maintenance
- Ports for Scheduled Oil Sampling (S·O·S℠)
- Platform-level engine oil dipsticks
- 1260 L (332.9 gal) onboard water tank
- Side water fill valve
- Water spray system
Safety And Security
- Platform handrails
- Signaling/warning horn