.
🔍
🔍
🔍
🔍
Description
Technical Specifications
Benefits and Features
Equipment
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
| Generator Set Specifications | |
| Frequency | 60 Hz |
| Natural Gas Rating | 200 eKW |
| Emissions/Fuel Strategy | U.S. EPA Certified for Non-Emergency Application |
| Displacement | 864.71 in |
| Fuel Type | Natural Gas |
| Speed | 1800 rpm |
| Engine Specifications | |
| Engine Model | 14.2 L, Inline 6, 4 Cycle, Spark - Ignited |
| Fuel System | Carburetor, Down Draft |
| Aspiration | Turbocharged-Aftercooled |
| Governor Type | Electronic |
| Compression Ratio | 9.5:1 |
| Bore | 5.31 in |
| Stroke | 6.5 in |
| Generator Set Dimensions | |
| Length | 127.95 in |
| Width | 52.93 in |
| Height | 67.37 in |
| Weight | 5756 lb |
Engine
- Four-stroke-cycle gas engine combines consistent performance and excellent fuel economy with minimum weight
Generator
- Matched to the performance and output characteristics of Cat engines
- Industry leading mechanical and electrical design
- Industry leading motor starting capabilities
- High Efficiency
EMCP Control Panel
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
Design Criteria
- The generator set facilitates compliance with NFPA 110 and meets ISO 8528-5 requirements for transient response
- Cooling system designed to operate in 50˚C/122˚F ambient temperatures with an air flow restriction of 0.5 in. water
UL 2200 / CSA - Optional
- UL 2200 Listed packages
- CSA Certified
- Certain restrictions may apply
- Consult with your Cat® Dealer
Worldwide Product Support
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
- Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
Standard Equipment:
-
- Cooling
-
- Closed coolant recovery system
- Factory-installed radiator
- 50/50 Ethylene glycol antifreeze
- Radiator and cooling fan complete with protective guards
- Standard ambient temperatures up to 50°C (122°F)
-
- Air Inlet
-
- Single element air filter
-
- Fuel
-
- Primary and secondary fuel shut-off
- Low fuel pressure switch
- Fuel pressure test po
- Natural Gas or LP Vapor
- NPT connection
- Dual lock off valves
-
- Exhaust
-
- Exhaust outlet with 3” pipe
-
- Generator
-
- Permanent magnet excitation
- Full load capacity alternator
- Class H insulation material
- Permanent magnet excitation
- Integrated Voltage Regulator
- Matched to the performance and output characteristics of Cat engines
- Class H insulation material
- Full load capacity alternator
- IP23 Protection
-
- Controls
-
- EMCP 4.2 Series generator set controller
-
- Mounting
-
- Vibration isolaton (puck type)
- Rubber vibration isolators
-
- Electric Power - Package Serial Number Prefix
-
- Battery charging alternator
-
- Electric Starting And/or Prelube
-
- Battery cables
- Solenoid activated starter motor
- Engine electrical system
- Solenoid activated starter motor
-
- Governor
-
- Electronic governor (non adjustable)
-
- Control Panel
-
- EMCP 4.2 Series generator set controller
-
- Starting/charging
-
- Batteries with rack and cables
- 12 volt starting motor
Optional Equipment:
-
- Starting/charging
-
- Jacket water heater
- Battery heater
- Charging alternator
- Battery charger – UL Listed 10 amp
-
- General
-
- Enclosures: sound attenuated, weather protective
- Suitable for Use as Service Equipment (SUSE)
- Automatic transfer switches (ATS)
- UL 2200 package
- CSA Certification
-
- Generator
-
- Thermal magnetic or electronic trip MCCBs
- Anti-condensation heater
- Shunt trip and auxiliary contact breaker
- Anti-condensation heater
- Excitation: [ ] Permanent Magnet Excited (PM)
- Oversize and premium generators
