930M Aggregate Handler Small Wheel Loader

🔍

Description

Technical Specifications

Benefits and Features

Equipment

360 View

The Cat® 930M Aggregate Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. The optimized Z-bar loader linkage combined with long wear life Performance Series buckets delivers improved payloads and bucket longevity. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience the new industry benchmark.

Engine
Maximum Gross Power	168 hp
Bore	4 in
Stroke	5 in
Displacement	427 in³
Engine Model	Cat® C7.1
Maximum Rated Gross Power - ISO 14396	168 hp
Emissions	The Cat C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 4 Final emission standards.
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)	601 ft·lbf
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)	586 ft·lbf
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4)	588 ft·lbf
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)	573 ft·lbf
Note (1)	*Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Note (2)	Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Note (3)	No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)	160 hp
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)	168 hp
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)	1600 r/min
Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)	1800 r/min
Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)	164 hp
Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)	163 hp
Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4)	170 hp
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4)	166 hp
Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4)	587 ft·lbf
Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)	156 hp
Maximum Rated Gross Power - ISO 14396 (metric)	170 hp
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)	158 hp
Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3*)	572 ft·lbf
Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*)	162 hp
Net Power (Performance Power Mode: Range 1-4)	1800 r/min
Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)	156 hp
Net Power (Standard Power Mode: Range 1-3*)	1600 r/min
Weights
Operating Weight	31848 lb
Note (2)	~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package.
Note (1)	**Aggregate Handler machine equipped with full counterweight and optional guards.
Operating Weight (1)	14 374 kg (31,689 lb)**
Operating Weight (2)	14 446 kg (31,848 lb)~
Buckets
Bucket Capacities	2.5-5.0 m3 (3.3-6.5 yd3)
Cab
ROPS	ISO 3471:2008
Declared Sound Levels	Declared Sound Levels – Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)* – Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*
Note (1)	* Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds.
FOPS	ISO 3449:2005 LEVEL II
Loader Hydraulic System
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height)	1.5/1.7 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level)	2.7/2.7 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift)	5.1/5.7 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time	9.3/10.1 seconds
Lift Cylinder, Double Acting - Bore Diameter	4.7 in
Lift Cylinder, Double Acting - Rod Diameter	2.6 in
Lift Cylinder, Double Acting - Stroke	28.7 in
Maximum Flow - Implement Pump	50 gal/min
Maximum Working Pressure - Implement Pump	3771 psi
Note (1)	Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Note (2)	Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Note (3)	* 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
Relief Pressure - Tilt Cylinder	4061 psi
Tilt Cylinder, Double Acting - Bore Diameter	5.9 in
Tilt Cylinder, Double Acting - Rod Diameter	3.5 in
Tilt Cylinder, Double Acting - Stroke	21.9 in
Maximum Flow - Implement Pump - 4th Function Maximum Flow*	42 gal/min
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure	4061 psi
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure	3771 psi
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*	50 gal/min
Power Train
Brakes - Parking	Spring applied hydraulically released
Brakes - Service	Inboard wet disc
Front Axle	Fixed
Note (1)	Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Note (2)	Offset rims available to meet European roading requirements.
Note (3)	*Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
Rear Axle	Oscillating
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65	± 10.5 degrees
Rear Axle - Traction Aid - Optional	Limited slip differential
Front Axle - Traction Aid*	Locking differential (standard)
Service Refill Capacities
Cooling System	7.9 gal (US)
Diesel Exhaust Fluid (DEF) Tank	5 gal (US)
Engine Crankcase	5.3 gal (US)
Front Axles	6.9 gal (US)
Hydraulic System - Including Tank	43.6 gal (US)
Hydraulic Tank	23.8 gal (US)
Rear Axles	6.6 gal (US)
Transmission - Gear Box	2.2 gal (US)
Fuel Tank	51.5 Gal
Steering
Maximum Flow - Steering Pump	34 gal/min
Maximum Working Pressure - Steering Pump	3500 psi
Note (1)	Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Note (2)	Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed	2.4 s
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited	2.8 s
Steering Cylinder, Double Acting - Bore Diameter	2.8 in
Steering Cylinder, Double Acting - Rod Diameter	1.6 in
Steering Cylinder, Double Acting - Stroke	17.2 in
Transmission
Forward and Reverse - Range 1*	1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 2	8 mile/h
Forward and Reverse - Range 3	17 mile/h
Forward and Reverse - Range 4	25 mile/h
Note	* Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
Sustainability
Recyclability	94%
Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential – 1430. The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.
Operating Specifications
Note (2)	~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package.
Note (1)	**Aggregate Handler machine equipped with full counterweight and optional guards.
Full Turn Tip Load (2)	9302 kg (20,507 lb)~
Full Turn Tip Load (1)	9203 kg (20,289 lb)**

Application Specific Configuration

INCREASED PAYLOAD
Additional counterweight improves stability without reducing ground clearance or departure angle to maximize performance.

LONG LIFE SAND AND GRAVEL BUCKETS
Performance Series Buckets deliver higher fill factors and better material retention for significant productivity and fuel efficiency improvements. The buckets feature a long floor, open throat, curved side bars and additional serviceable wear plates including corner guards.

PROTECT YOUR POWER TRAIN
Increase your fording depths with optional elevated breathers. Remote mounted high on the machine for the front and rear axles and hydrostatic gear box. Allows settling pond clean out without contamination.

Efficiently Powerful

The Cat® C7.1 engine provides cleaner, quieter operation while delivering superior performance and durability through a high torque, low speed design. Caterpillar's exclusive Intelligent Power Management system monitors operator input and power availability to keep the machine working at peak efficiency and provide the operator with greater customization to suit their application.

A choice of Power Modes allows you to choose between maximum fuel efficiency or boosted power along with hydraulic speed.

STANDARD POWER MODE

Saves fuel and reduces cab sound levels
Biggest gains are seen during load and carry, snow removal and roading applications

PERFORMANCE POWER MODE

Enabled at the push of a button (HP+), boosts engine power by up to 10% and engine speed by over 12%
Increases hydraulic cycle times and productivity

Lock up and go with fully locking front differential axle that can be engaged on the move at full torque. Maximize your traction with optional Limited Slip Differential on the rear axle to keep you climbing.

Enjoy All Day Comfort

A spacious, quiet and comfortable operator environment helps keep you relaxed and productive throughout the day. Experience superior all around visibility with single piece front windshield, redesigned linkage and clean hydraulic lines routing. Seat-mounted controls featuring low effort joystick for lift and tilt functions along with integrated Forward/Neutral/Reverse switch, differential lock trigger and optional third and fourth auxiliary functions.

Automatic climate control with heated rear glass and external mirrors
Information at a glance with large primary LCD display
Heated and cooled seat option
Optional Ride Control
Exclusive electro-hydraulic cylinder snubbing
An extra eye on the job site with optional integrated rear object detection and optional* rearview camera

*Standard in Europe.

Customize Your Experience

The M Series Aggregate Handler will remember you and your personal settings with unique operator codes to make this machine truly yours and keep it secure.

Work as one with your machine by customizing your controls.

Select your Power Train Mode
Reduce tire wear using Rimpull
Fine tune ground speed with Creeper Control
Adjustable Electo-Hydraulic Controls
Set Directional Shift Response based on job application

Service

Get up and running quickly with ground level, daily service access and optional engine compartment lighting. Three large service doors can be opened and closed in any order to give full access to filters and service points. Extended service intervals on hydraulic and power train filters reduce service time and maximize uptime. Additional service features include:

Product Link™ PRO standard with optional subscription to VisionLink®.
Maintenance reminders through secondary display at scheduled intervals.
Fit for Life Diesel Particulate Filter that is designed to exceed the engine overhaul life.
Quick fuel filter service with Caterpillar's exclusive electric fuel priming pump.
Jump start studs as standard equipment.
Extended cleanouts with single plane cooling system and wide spaced 6 fans per inch coolers as standard.
Integrated Autolube (optional) with adjustable greasing frequency.

Customer Support

With renowned Cat dealer support, rely on your Cat dealer to help you every step of the way with new or used machine sales, rental or rebuild options to meet your business needs.

Maximize your machine uptime with unsurpassed worldwide parts availability, trained technicians and customer support agreements.

Let us earn your business. Experience an M Series Small Wheel Loader and join the Caterpillar family.

Sustainability

The Cat® C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 5 emission standards.
Engine Idle Management System (EIMS) helps maximize fuel efficiency and reduce greenhouse gas emissions while maintaining machine performance.
Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
Performance Series Buckets have rounded side boards, a longer floor and open angle to carry more and load quicker so each pass is the most efficient.
Rimpull Control is a quick way to adjust the torque to the tires for less slipping and tire wear.
Cat® Production Measurement provides real-time payload weighing which help you maximize productivity, reduce fuel burn and greenhouse gas emissions, all while improving job site efficiency and lowering costs.
Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
Power on Demand, transparent to the operator, provides full-time efficiency and power when you need it.
Tire Pressure Monitoring provides real-time tire pressure information to the operator to help increase tire wear and achieve better fuel efficiency and reduced greenhouse gas emissions.
Intelligent Hystat Transmission helps improves control and reduces fuel consumption and greenhouse gas emissions in load and carry applications.
Variable Displacement Pumps match power to load as application requirements change.

Standard Equipment:

Power Train
- Axle Duo-Cone^™ seal guards
- Axle seal guards
- Auto idle shut down feature
- Auto idle shut down feature
- Cat C7.1 engine
  – Power modes (Standard and Performance)
  – Power by range (High Power in Range 4)
  – Turbocharged and aftercooled
  – Diesel particulate filter (Fit for Life)
- Cat^® C7.1 engine: – Power Modes (Standard and Performance) – Power by Range (High Power in Range 4) – Turbocharged and aftercooled – Filtered crankcase breather – Diesel particulate filter (Fit for Life)
- Coded start (requires secondary display)
- Coolant protection to –34° C (–29° F)
- Differential lock in front axle
- Differential lock in front axle
- Enclosed wet disc full hydraulic brakes
- Dry type air cleaner
- Hydraulically driven demand cooling fan
- Enclosed wet disc full hydraulic brakes
- Hydrostatic transmission with electronic control
  – Operator modes (Default, TC, Hystat, and Ice)
  – Directional Shift Aggressiveness (fast, medium, slow)
  – Rimpull control, adjust wheel torque
  – Creeper control, adjust ground speed
- Fuel priming pump, automatic
- Parking brake, electric
- Fuel water separator
- Single plane cooling package wide six fins per inch density
- Hydraulically driven demand cooling fan
- Oil sampling ports
- Intelligent hydrostatic transmission: – Power train modes – Directional Shift Aggressiveness – Rimpull control, adjust wheel torque – Creeper control, adjust ground speed
- Throttle lock and max speed limiter
- Lubed for life driveshafts
- Parking brake, electric
- Wide spaced 6 fins per inch cooling package
- S·O·SSM sampling ports
- Throttle lock and maximum speed limiter
Hydraulics
- Automatic lift lower and tilt kickouts, adjustable in-cab
- Bucket and fork modes, adjustable in-cab
- Cylinder damping at kickout and mechanical end stops
- Fine mode control (fast, medium, slow)
- Hydraulic response setting (fast, medium, slow)
- Automatic lift, lower and tilt kickouts
- Load sensing hydraulics and steering
- Bucket and Fork Modes, adjustable in-cab
- Seat-mounted hydraulic joystick controls
- Cylinder damping at kickout and end stops
- Fine Mode control in Fork Mode
- Hydraulic Response setting
- Load sensing hydraulics and steering
- Seat-mounted hydraulic joystick controls
Electrical
- Alternator, 115 amp, heavy duty
- Batteries, 1,000 CCA (2) 24V system, disconnect switch
- Back-up alarm
- Emergency shutdown switch
- Halogen work and roading lights, LED rear tail lights
- Alternator, 115-amp, heavy duty
- Product Link PRO with three year subscription
- 12V power supply in cab (2)
- Remote jump start post
- Batteries, 1,000 CCA (2) 24 volt system
- Resettable main and critical function breakers
- Back-up alarm
- Emergency shutdown switch
- Heavy duty gear reduction starter
- Product Link PRO with subscription
- Remote jump start post
- Resettable main and critical function breakers
Operator Environment
- 75 mm (3 in) High-Vis retractable seat belt, with audible alarm and indicator
- Automatic temperature control
- Cab, pressurized
- Camera, rearview
- External heated mirrors with lower parabolic
- Ground level cab door release
- 75 mm (3 in) retractable seat belt, with audible alarm and indicator
- Hydraulic control lockout
- Automatic temperature control
- Mirror, single
- Cab, enclosed and pressurized
- Lunch box storage
- Cup holders
- Radio ready speakers
- External heated mirrors with lower parabolic
- Rear window defrost, electric
- Ground level cab door release
- Column mounted multi function control – lights, wipers, turn signal
- Gauges: – Digital hour meter, odometer, tachometer, ground speed and direction indicator – Engine coolant temperature gauge – Fuel and Diesel Exhaust Fluid level – Hydraulic oil temperature gauge
- Tilt and telescopic steering wheel
- Hydraulic control lockout
- Tinted front glass
- Interior cab lighting, door and dome
- Wet arm wiper/washer, 2-speed and intermittent, front, lights, wipers, turn signal
- Interior rearview mirrors (2)
- Suspension seat, fabric
- Lunch box storage
- Operator warning system indicators
- Radio ready speakers
- Rear window defrost, electric
- Seat-mounted controls, adjustable
- Sliding glass on the side windows
- Column mounted multi function control – lights, wipers, turn signal
- Suspension seat, fabric
- Tilt and telescopic steering wheel
- Wet arm wiper/washer, front and rear
Other Standard Equipment
- Large-access enclosure doors with adjustable close/open force
- Cat optimized Z-bar linkage with parallel lift
- Recovery hitch, with pin
- Remote mounted lubrication points
- Lockable compartments and enclosures
- Large-access enclosure doors
- Parallel lift loader linkage
- Recovery hitch with pin
- Remote mounted lubrication points
- Lockable compartments and enclosures