Cat® G3306 Industrial Gas Engine. Ratings: 108-157 bkW (145-211 bhp) @ 1800 rpm are NSPS site compliant capable with customer-supplied aftertreatment. Some ratings also have standard emission settings available for export only. For specific emission information, please consult your local Cat Dealer.
General | |
Bore | 121 mm (4.75 in) |
Stroke | 152 mm (6.0 in) |
Displacement | 10.5 L (638 in³) |
Aspiration | Turbocharged Aftercooled (TA) |
Engine Configuration | Engine - Continuous |
Power Rating | |
Minimum Power | 145 hp |
Maximum Power | 211 hp |
Frequency | 1800 rpm |
Engine Dimensions - Approximate | |
Height | 1261 mm (50 in) |
Length | 1539 mm (60 in) |
Weight - Net Dry | 948 kg (2090 lb) |
Width | 978 mm (38 in) |
Engine Design
- Proven reliability and durability
- Ability to burn a wide spectrum of gaseous fuels
- Robust diesel strength design prolongs life and lowers owning and operating costs
- Broad operating speed range
Full Range of Attachments
Large variety of factory-installed engine attachments reduces packaging time
Quality
Every Cat engine is manufactured to stringent quality standards in order to assure customer satisfaction.
World-class Product Support Offered Through Global Cat Dealer Network
- Scheduled maintenance, including SOSSM sample
- Customer Support Agreements (CSA)
- Caterpillar Extended Service Coverage (ESC)
- Superior dealer service network
- Extended dealer service network through the Cat Industrial Service Distributor (ISD) program
World-class Product Support Offered Through Global Cat Dealer Network
- Scheduled maintenance, including SOSSM sample
- Customer Support Agreements (CSA)
- Caterpillar Extended Service Coverage (ESC)
- Superior dealer service network
- Extended dealer service network through the Cat Industrial Service Distributor (ISD) program
Standard Equipment:
-
- Air Inlet System
-
- Air cleaner
- Air cleaner rain cap
- Service indicator
-
- Control System
-
- Hydra-mechanical governor
-
- Cooling System
-
- Thermostats and housing
- Jacket water pump
- Aftercooler water pump
- Aftercooler core
-
- Exhaust System
-
- Watercooled exhaust manifolds
- Dry exhaust elbow
-
- Flywheels & Flywheel Housings
-
- SAE No. 1 flywheel
- SAE No. 1 flywheel housing
- SAE standard rotation
-
- Fuel System
-
- Gas pressure regulator
- Natural gas carburetor
-
- Ignition System
-
- Altronic V ignition system
-
- Instrumentation
-
- Service meter
-
- Lube System
-
- Crankcase breather — top mounted
- Oil cooler
- Oil filter
- Oil pan — full sump
- Oil filler and dipstick
-
- Mounting System
-
- Engine supports
-
- Protection System
-
- Shutoffs
-
- General
-
- Paint — Cat yellow
- Crankshaft vibration damper and pulley
- Lifting eyes
Optional Equipment:
-
- Charging System
-
- Battery chargers
- Charging alternators
- Ammeter gauge
- Ammeter gauge and wiring
-
- Control System
-
- PSG Woodward governor
- Vernier and positive locking control
-
- Cooling System
-
- ATAAC conversion
- Aftercooler group
- Expansion tank
- Heat exchanger and expansion tank
- Radiator
- Blower fan for customer supplied radiators
- Suction fan for customer supplied radiators
- Fan drives for customer supplied radiators
- Fan adapter for customer supplied radiators
- Belt tightener
-
- Exhaust System
-
- Flexible fittings
- Elbows
- Flanges
- Pipes
- Rain caps
- Mufflers
-
- Fuel System
-
- Low pressure gas conversion
- Fuel filter
-
- Ignition System
-
- Altronic III
- CSA shielded ignition
- Wiring harness
- Dual timing
-
- Instrumentation
-
- Gauges and instrument panels
-
- Lube System
-
- Lubricating oil
-
- Mounting System
-
- Vibration isolators
-
- Power Take-offs
-
- Auxiliary drive pulleys and auxiliary pump
- Enclosed clutch and clutch support
- Flywheel stub shaft
- Front stub shaft
-
- Protection System
-
- Mechanical shutoff
- Gas valves
-
- Starting System
-
- Air starting motor
- Air pressure regulator
- Air silencer
- Electric starting motors with start switch installed/ shipped loose
- Starting aids
- Battery sets
-
- General
-
- Tool set