TL642D Telehandler

🔍
🔍
🔍
🔍

 

Description
Technical Specifications

The TL642D is precision engineered to handle any task, offering stability, maneuverability, speed and power in any application.

Operating Specifications
Rated Load Capacity 6500 lb
Maximum Lift Height 42 ft
Maximum Forward Reach 30 ft
Top Travel Speed 21 mile/h
Capacity at Maximum Height 6500 lb
Capacity at Maximum Reach 700 lb
Drawbar Pull - Loaded 19783 lbf
Frame Leveling 10°
Turning Radius - Over Tires 12 ft
Engine
Engine Model Cat® C3.4B
Gross Power - Basic 100 HP
Note Meets U.S. EPA Tier 4 Final emission standards.
Weights
Operating Weight 22002 lb
Tires
Standard 370/75-28 Air Duraforce
Optional (1) 370/75-28 Foam Duraforce
Optional (2) 13.00 × 24-16 PR Air
Optional (3) 13.00 × 24-12 PR Foam Filled
Optional (4) 13.00 × 24 Solid
Service Refill Capacities
Fuel Tank 38.3 gal (US)
Diesel Exhaust Fluid (DEF) Tank 5.7 gal (US)
Hydraulic System 40 gal (US)
Boom Performance
Boom Up 15 s
Boom Down 10.3 s
Tele In 9.5 s
Tele Out 16.3 s
Hydraulic System
Gear Pump Single-section
Auxiliary Hydraulic Flow 18 gal/min
Auxiliary Hydraulic Pressure 3481 psi
Note Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.
System Operating Pressure 3770 psi
Brakes
Parking Brakes Wet disc, spring applied hydraulic release on front axle
Service Brakes Inboard wet disc brakes on front and rear axles
Axles
Type (1) Trunnion mounted planetary 55 degree steer axles.
Type (2) High bias limited slip differential on front axle.
Transmission Speeds
Forward 4 speed
Reverse 3 speed
Work Tools
Carriages - Dual Fork Positioning 50 in
Carriages - Side Shift 48 in
Carriages - Standard Rotate 50 in
Carriages - Standard Tilt 50 in
Carriages - Swing 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
Carriages - Wide Rotate 72 in
Carriages - Wide Tilt 72 in
Cubing Forks [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Hydraulic IT Coupler Includes Auxiliary Electrics
Lumber Forks - Option 1 [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
Lumber Forks - Option 2 [2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in)
Pallet Forks - Option 1 [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
Pallet Forks - Option 2 [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
Pallet Forks - Option 3 [2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in)
For our customers, we remain open to serve you; however, we are temporarily limiting access at all locations to employees only. 
For parts customers, we will be providing a curbside pickup option at many of our facilities. We encourage you to call your local NMC location or use our online services to order parts or schedule service.
 While these are challenging times, we’ll continue to make the decisions that best support you and our team. Please visit this page for more information.
+